Phone for pricing

Trioliet Solomix 2-2400 VLL-C. Magnet on auger, digistar scale system with EZ2810V display, extra knives, 3/8 x 21 spline 1000 PTO, LED light kit, Shiftronic 2-speed, twin stream auger (1" wings and 7/8" flighting), HD hitch jack, discharge window, HD undercarriage, 108" wide curved conveyor, discharges on both sides, 5/16 side wall and 1/2 wear ring. 

 

$6900.00

This Haybuster 256 plus 2 bale processor is loaded with all the functional. 

 

$119000.00

Power Quad 24 speed, 6 ranges, 4 power shift, 3 remotes, 3613 hrs, rear tires 650/65R38 60%, front tires 540/65R28 new, rear wheel weights, H360 loader with bucket and grapple, this tractor has had one owner, and it's in very good condition! 

 

Phone for pricing

Round bale 6 ft by 5 ft, remote control for starting, steering and stopping, large fuel tank. 

 

Phone for pricing

This bale wrapper Farm King Combo. Can wrap round bales 6 ft by 5 ft, comes with remote control for starting, steering and stopping, and has a large fuel tank. 

 

Phone for pricing

Minimum raking width 19.9 ft, maximum raking width 24.4 ft, minimum windrow width 21 inches, maximum windrow width 98 inches. Requires 30 hp. Hydraulic type one double-acting requires 5 GPM flow. Maximum raking speed 14 mph. 

 

Phone for pricing

minimum raking width 19.9 ft, maximum raking width 24.4 ft, minimum windrow width 21 inches, maximum windrow width 98 inches. Requires 30 hp. Hydraulic type one double-acting requires 5 GPM flow. Maximum raking speed 14 mph. 

 

Phone for pricing

This Supreme 900 Twin has a hard surface cutting augers, 1-3/8" 21 spline CV PTO, 500/45R20 41" walking beam axle, articulating hitch, 10' conveyor, right-hand side dogleg, Digistar scale and extra left side readout, 10" rubber top extension. 

 

Phone for pricing

articulating hitch, 700/70R22.5 single axle, 10' conveyor, right-hand dogleg, 1-3/8" 21 spline CV PTO, Digistar scale with left side readout and rubber top extension. 

 

$49500.00

3' auger, screen 5/32", 140-bushel tank. 

 

Phone for pricing

Minimum raking width 18ft, maximum raking width 23 ft, minimum windrow width 36 inches, maximum windrow width 72 inches. Tractor requirements 35 HP and 8 GPM hydraulic flow rate. 

 

Phone for pricing

Minimum raking width 18ft, maximum raking width 23 ft, minimum windrow width 36 inches, maximum windrow width 72 inches. Tractor requirements 35 HP and 8 GPM hydraulic flow rate. 

 

$139000.00

Coming up for sale April 15. This unit has 4985 hrs on it, 4 remotes and its Engine chipped up, 430 hp, JD Power Sync (standard transmission)and 800 tires all work orders for this unit can be shown, very nice clean tractor! 

 

$13500.00

this unit has a Small 1000 PTO, with walking beam tandem axles. Asking price $13,500.00 

 

Phone for pricing

1-3/8 21 spline CV PTO, 8' conveyor, right-hand dogleg, hydraulic extender, extra side display, 10" rubber extension. 

 

Phone for pricing

This unit has a hydraulic extender, dogleg, extra side display and 1000 RPM CV PTO 

 

$2300.00

Information coming soon! 

 

Phone for pricing

This unit Requires 30hp with Hydraulic type one double-acting and requires 5 GPM flow. It has a Maximum raking speed of 14 mph, minimum raking width of 19.9 ft /maximum raking width of 24.4 ft, minimum windrow width of 21 inches /maximum windrow width of 98 inches 

 

$1500.00

This Bale wagon can haul up to 6 bales. Asking price $1,500.00 

 

Phone for pricing

This unit Requires 30hp with Hydraulic type one double-acting and requires 5 GPM flow. It has a Maximum raking speed of 14 mph, with a minimum raking width of 19 ft / maximum raking width of 22.6 ft, and minimum windrow width of 16 inches / maximum windrow width of 82 inches. 

 

Phone for pricing

DEMO UNIT, This landroller has a 42" x 5/8" drum with a hydraulic floating hitch. 

 

Phone for pricing

This Tractor has a deluxe cab with leather seating, its front tires are 600/65R28, and rear tires are 710/70R38 Trelleborg, This unit comes with ISOBUS completion package, autosteer ready, radio, LED lights, suspended front axle with difflock, HD drawbar, high flow hydraulics, variable pitch reversing fan, front weight package, and front fenders and rear fender extensions. 

 

Phone for pricing

Capacity: 1072 cu ft. Options: Hard surface cutting augers, 1-3/8 21 spline CV PTO, 45" walking beam, articulating hitch, 10 ft conveyor right-hand discharge, dogleg, hydraulic extender, Digistar TMR2810 scale with Digistar RD2500 left side readout, 10-inch rubber extension. 

 

Phone for pricing

This 2021 bale wrapper with Custom Operator Elite. can handle round bales up to 6 ft by 5 ft, it has a remote control for starting, steering and stopping. this unit also has a large fuel tank, 2 extra stretchers, and an automatic pilot. 

 

Phone for pricing

Like all Vermeer products, the 605N Vermeer baler is built to last. This baler features a pickup that automatically disengages when the desired bale size is reached. Baler diameter is 72 inches, baler width is 61". this unit requires 80 HP, recommended 100 HP 

 

Phone for pricing

This bale processor Requires between 85 HP and 210 HP and has a PTO speed of 1000 RPM, it's hydraulic flow rate is 8 GPM, This unit also has 3-double acting hydraulics, right-hand discharge, and floatation tires. 

 

Phone for pricing

Like all Vermeer products, the 605N Vermeer baler is built to last Baler diameter is 72 inches, baler width is 61". this unit requires 80 HP, recommended 100 HP 

 

Phone for pricing

This unit Requires 30hp with Hydraulic type one double-acting and requires 5 GPM flow. It has a Maximum raking speed of 14 mph, minimum raking width of 19.9 ft /maximum raking width of 24.4 ft, minimum windrow width of 21 inches /maximum windrow width of 98 inches 

 

Phone for pricing

The I-4131 combines two rows of concave disc blades split by two rows of coulters on the same frame to make for more aggressive tillage than wave coulters alone. This unit is equipped with Cat 4 articulating hitch, a hydraulic telescope with cushion, complete weight kit, hydraulic 3 bar 1/2" coil tines and manual single roller. Operating depth range 0 - 5". HP required between 350 and 410. 

 

Phone for pricing

This unit Requires 30hp with Hydraulic type one double-acting and requires 5 GPM flow. It has a Maximum raking speed of 14 mph, minimum raking width of 19.9 ft /maximum raking width of 24.4 ft, minimum windrow width of 21 inches /maximum windrow width of 98 inches 

 

Phone for pricing

This unit Requires 30hp with Hydraulic type one double-acting and requires 5 GPM flow. It has a Maximum raking speed of 14 mph, minimum raking width of 19.9 ft /maximum raking width of 24.4 ft, minimum windrow width of 21 inches /maximum windrow width of 98 inches 

 

Phone for pricing

This unit has a working width of 24 ft and has a working speed of 9 mph. 

 

Phone for pricing

This bale processor Requires between 85 HP and 210 HP and has a PTO speed of 1000 RPM, it's hydraulic flow rate is 8 GPM, This unit also has 3-double acting hydraulics, right-hand discharge, and floatation tires. 

 

Phone for pricing

This Mower Conditioner has side pull, 6 discs, rubber roller conditioner, 540 PTO, cutting width of 9.1ft, minimum cutting height 1 inch, maximum cutting height 8 inches, minimum of 65 HP required. Hydraulic flow rate required 6 GPM. 

 

Phone for pricing

this unit has side pull, 6 discs, rubber roller conditioner, 540 PTO, cutting width of 9.1ft, minimum cutting height 1 inch, maximum cutting height 8 inches, minimum of 65 HP required. Hydraulic flow rate required 6 GPM. 

 

Phone for pricing

This unit has a working width of 24 ft and has a working speed of 9 mph. 

 

Phone for pricing

this unit is a 2 Stage cleaner with an engine drive system, intake auger, it also comes with a cone screen and drum screen. 

 

Phone for pricing

This unit can handle Round bales up to 6 ft by 5 ft and has a remote control for starting, steering, and stopping, this unit also has a large fuel tank and autopilot. 

 

Phone for pricing

This unit has a manual wrapping process via the hydraulic controls of the tractor, mechanical plastic cutting and can handle bales up to 6 ft by 5 ft. 

 

Phone for pricing

This unit Can do round bales 6 ft by 5 ft or square bales up to 6 ft by 3 ft, it has 4 stretchers, and autopilot. 

 

Phone for pricing

This 2021 Anderson IFX 720 bale wrapper Farm King Combo can wrap Round bale 6 ft by 5 ft. This unit comes with remote control for starting, steering and stopping, and has a large fuel tank. 

 

Phone for pricing

This tedder has a working width of 19', a transport width of 10'5", and a working speed of 9mph. Unit weight is 1,400 lb 

 

Phone for pricing

This tedder has a working width of 10', a transport width of 8'2", and a working speed of 9mph. Unit weight is 490 lb 

 

Phone for pricing

Farm king 410 rotary cutter has a cutting width of 48" and a 3-pt hitch Cat I for tractors, Tractor requirements 20 - 45 hp, weight 448lb 

 

Phone for pricing

This heavy-duty finishing mower has a cutting width of 84", and a cutting height of 1-1/2" to 5-1/2", tractor requirements 25-55hp, weight 780lb 

 

Phone for pricing

This homeowners series finishing mower has a cutting width of 60", and a cutting height of 1-1/2" to 5-1/2". Tractor requirements 12-25hp. Weight 442lb. 

 

Phone for pricing

this heavy-duty finishing mower has a cutting width of 60", and a cutting height of 1-1/2" to 5-1/2". Tractor requirements 15-55 hp. Weight 627lb. 

 

Phone for pricing

this homeowner series finishing mower has a cutting width of 72", and cutting height of 1-1/2" to 5-1/2". Tractor requirements 20-30 hp. Weight 569lb. 

 

Phone for pricing

This Kioti mid-mount mower Fits Kioti compact tractor units CS2210, CS2410 and CS2510. 

 

Phone for pricing

This unit has a Tillage width of 45", and come with a 3-point hitch Category I for tractors. requires 14 - 22HP. Colour Charcoal 

 

Phone for pricing

This unit has a Tillage width of 69", and come with a 3-point hitch Category I for tractors. requires 30 - 45HP. Colour Charcoal 

 

Phone for pricing

This unit has a Tillige width of 54", and come with a 3-point hitch Category I for tractors. requires 18 - 25HP. Colour red 

 

Phone for pricing

WIFO heavy duty 3 pt hitch bale unroller 

 

Phone for pricing

this unit has a 72" working width, 3/8" x 2 reversible skid shoes, mouldboard thickness 1/4", cutting edge 1" adjustment, and has a weight of 630 lbs 

 

Phone for pricing

this unit has a 72" working width, 3/8" x 2 reversible skid shoes, mouldboard thickness 1/4", cutting edge 1" adjustment, and has a weight of 630 lbs 

 

Phone for pricing

this unit has an Alo-Q-tach frame with hose kit and can Open up to 84". This Grapple can carry square bales 4-6 ft long or round bales 5-6ft diameter and has a capacity of 2000lbs 

 

Phone for pricing

This unit weighs 413lb and has a Width of 120", Harrows 3 - 40", tractor requirements of 20-65HP 

 

$145000.00

This unit comes with front differential lock axle, deluxe can, leather seating, dual speed PTO, front and rear weights, 520/85R46, 600/65R30 in front 

 

$9500.00

This Consignment unit is 29ft wide with anhydrous ammonia option, and is currently set for 80 lbs at 5mph 

 

$145000.00

This Versatile Row-Crop tractor has high flow, ultra steer, 380/85R34 dual front, rear 480/80R46 duals, front weights, rear weights, HID lights, radio ONLY 698 HOURS! 

 

Phone for pricing

McCormick X6.470, 540/65R28 tires front, 650/65R38 tires rear, front fenders, 3 rear spool valves, power shuttle, 58+18 transmission 0% financing available for up to 60 months 

 

Phone for pricing

The Elmers Ravage Bale Processor is designed to maximize your processing time with the ability to hold up to 3 square or 2 round bales including a variety of bale types. Live floor for full control, great visibility, adjustable upper beater bar, directional chute to spread or bunk, spring-loaded bale discharge door. 

 

$17500.00

This unit is an 8 bottom plow with a Variable setting 14" - 20" a shear. 

 

$19000.00

The Seeding tool features a Case International Vibra tiller 4700 it is 32ft wide comes with Valmar. can seed grasses and grains. and has a Light cultivator/packer attached to the seeding unit. 

 

$6500.00

this unit is a 22' wide width harrow 

 

$10500.00

from the front of the tractor to the center rear axle ± 12ft price $10500.00 

 

$25000.00

Brandt's Contour Commander heavy harrow 5000 is built rugged and designed to deliver consistent down pressure over uneven terrain. Brandt's superior engineering allows our Heavy Harrows to perform with more aggressive tine angles, leaving your field the way it's supposed to be! 

 

Phone for pricing

The vermeer r2300 twin rake is designed to produce box-shaped windrows for easier pickup for bales. The width, basket lift and folding/unfolding system controllable from the cab. Minimum raking with: 5.5m Raking width Maximum: 7m Windrow Width minimum: 91.4 cm Windrow width maximum: 182.9 cm Transport width and length: 2.6 m x 6.6m 

 

Phone for pricing

Get great-looking bales quickly and easily. It all starts with the Vermeer R2800 twin rake, which produces box-shaped windrows. Built to last, the R2800 allows you to adjust the width of the windrows to match your baler. Control the width, basket lift and folding/unfolding systems right from the cab of your tractor. 

 

$59000.00

this as-new unit has 26" notched blades front and back with stone flex hangers and upgraded bearings 

 

Phone for pricing

With a cutting width of 20.8 ft (6.3 m), the 10-series trailed mowers are ideal for operators who want to cut more hay in less time and want convenient features that take the stress out of operating, transporting and maintaining a large trailed mower. Features like the Q3® Cutter Bar, 2-point Quick Hitch hook up, a nitrogen charged accumulator suspension system, and the patented Quick-Clip® Blade Retention System that reduces the process of blade replacement to mere seconds. Big time productivity, big time convenience and a narrow 9-ft transport width. Plus, a 3-year cutter bar warranty on parts and labor. 

 

$30000.00

Farmer special, brand new Ezee-On 40' wide original seeding tool, never used $30,000.00 

 

Phone for pricing

100' Boom, GPS, Foam marker system, Chemical educator, Autoboom ultra glide, HID lighting, R&L hand fence nozzle. 

 

Phone for pricing

This unit has a 2000 bushel capacity with a 24" auger, large tracks, Haulmaster connect, hydraulic jack, and a tarp 

 

$9000.00

This unit is a 36 ft wide draper header and is the same as a Massey 5200 it has seen ± 700 hours of cutting Call today for more information! 

 

Phone for pricing

This unit has a 270 Cu Ft capacity with a 409 stainless steel hopper, an 8" mesh chain, and a 10' shur-lok tarp 

 

Phone for pricing

This new tractor from Versatile has been designed and developed with a special focus on superior value, performance, and operator experience. The Nemesis is powered by an industry-leading Cummins Stage V compliant B6.7 (Stage V) engine and powershift transmission supplied by ZF. The three horsepower ratings available are 175 hp, 195 hp, and 210 hp. 

 

Phone for pricing

This new tractor from Versatile has been designed and developed with a special focus on superior value, performance, and operator experience. The Nemesis is powered by an industry-leading Cummins Stage V compliant B6.7 (Stage V) engine and powershift transmission supplied by ZF. The three horsepower ratings available are 175 hp, 195 hp, and 210 hp. 

 

Instant quote available

The Deltatrack 570 is one of Versatile legacy of production, an extensive articulated four-wheel-drive tractors. When the conception of a track unit began there was no doubt that a four-track system was the best solution for Versatile and our customers. In partnership with industry-leading suppliers, Versatile has developed a new class leader in the agricultural market 

 

Instant quote available

The Deltatrack 570 is one of Versatile legacy of production, an extensive articulated four-wheel-drive tractors. When the conception of a track unit began there was no doubt that a four-track system was the best solution for Versatile and our customers. In partnership with industry-leading suppliers, Versatile has developed a new class leader in the agricultural market. 

 

Instant quote available

The Deltatrack 610 is one of Versatile legacy of production, an extensive articulated four-wheel-drive tractors. When the conception of a track unit began there was no doubt that a four-track system was the best solution for Versatile and our customers. In partnership with industry-leading suppliers, Versatile has developed a new class leader in the agricultural market. 

 

Instant quote available

The Deltatrack 610 is one of Versatile legacy of production, an extensive articulated four-wheel-drive tractors. When the conception of a track unit began there was no doubt that a four-track system was the best solution for Versatile and our customers. In partnership with industry-leading suppliers, Versatile has developed a new class leader in the agricultural market. 

 

Instant quote available

The Deltatrack 570 is one of Versatile legacy of production, an extensive articulated four-wheel-drive tractors. When the conception of a track unit began there was no doubt that a four-track system was the best solution for Versatile and our customers. In partnership with industry-leading suppliers, Versatile has developed a new class leader in the agricultural market. 

 

Instant quote available

The Deltatrack 520 is one of Versatile legacy of production, an extensive articulated four-wheel-drive tractors. When the conception of a track unit began there was no doubt that a four-track system was the best solution for Versatile and our customers. In partnership with industry-leading suppliers, Versatile has developed a new class leader in the agricultural market. 

 

Instant quote available

The Versatile 610 four-wheel articulated drive is designed to enhance the profitability of large scale farming operations while upholding the Versatile cornerstones of reliability, durability, and ease of service and maintenance. 

 

Instant quote available

The Versatile 570 four-wheel articulated drive is designed to enhance the profitability of large scale farming operations while upholding the Versatile cornerstones of reliability, durability, and ease of service and maintenance. 

 

Instant quote available

The Versatile 520 four-wheel articulated drive is designed to enhance the profitability of large scale farming operations while upholding the Versatile cornerstones of reliability, durability, and ease of service and maintenance. 

 

Instant quote available

The Versatile 460 four-wheel articulated drive is designed to enhance the profitability of large scale farming operations while upholding the Versatile cornerstones of reliability, durability, and ease of service and maintenance. 

 

Instant quote available

The Versatile 430 four-wheel articulated drive is designed to enhance the profitability of large scale farming operations while upholding the Versatile cornerstones of reliability, durability, and ease of service and maintenance. 

 

Instant quote available

The Versatile 405 four-wheel articulated drive is designed to enhance the profitability of large scale farming operations while upholding the Versatile cornerstones of reliability, durability, and ease of service and maintenance. 

 

Instant quote available

The Versatile 380 four-wheel articulated drive is designed to enhance the profitability of large scale farming operations while upholding the Versatile cornerstones of reliability, durability, and ease of service and maintenance. 

 

$79000.00

this unit comes with a 1000 gallon tank, Outback GPS, Raven valve, 5 sections shut off and has a 90' boom the unit has 1691 hours on it 

 

Instant quote available

The Fury is a high speed compact disc that excels at managing difficult residue in challenging field conditions. Designed for high speed operation, the Fury is more productive than traditional tillage since it operates at field speeds of 8 - 12 mph (12 - 20 km/hr). Two rows of blades set at a compound angle achieve a full cut at 2.5" (63 mm) working depth. This means no uneven ground surface left to hinder planting operations. 4 blade size options: 20" to 26" (508-660 mm) and the choice of 3 rear finishing attachments: round bar steel cage roller; corrugated rubber roller or a spring roller makes the Fury fully customizable for your local residue, field and moisture conditions. 

 

Instant quote available

The 1000T Pull-Type has a maximum payload of 30,000 lbs (13,608 kg), struck capacity of 779 ft³ (22.1 m³) or 897 ft³ (25.4 m³) with tub extension, and requires 170 horse power (127 kW). 

 

Instant quote available

The 900T Pull-Type has a maximum payload of 24,000 lbs (10,886 kg), struck capacity of 731 ft³ (20.7 m³) or 841 ft³ (23.8 m³) with tub extension, and requires 130 horse power (97 kW). 

 

Instant quote available

The 800T Pull-Type has a maximum payload of 18,000 lbs (8,165 kg), struck capacity of 650 ft³ (18.4 m³) or 745 ft³ (21.1 m³) with tub extension, and requires 115 horse power (86 kW). 

 

Instant quote available

The 700T Pull-Type has a maximum payload of 14,000 lbs (6,350 kg), struck capacity of 565 ft³ (16.0 m³) or 649 ft³ (18.4 m³) with tub extension, and requires 100 horse power (75 kW). 

 

Instant quote available

The 600T Pull-Type has a maximum payload of 14,000 lbs (6,350 kg), struck capacity of 543 ft³ (15.4 m³) or 635 ft³ (18.0 m³) with tub extension, and requires 100 horse power (75 kW). 

 

Instant quote available

The 500T Pull-Type has a maximum payload of 14,000 lbs (6,350 kg), struck capacity of 480 ft³ (13.6 m³) or 561 ft³ (15.9 m³) with tub extension, and requires 80 horse power (60 kW). 

 

Instant quote available

The Supreme 600 Pull-Type has a maximum payload of 14,000 lbs (6,350 kg), a struck capacity of 465 ft³ (13.2 m³) or 534 ft³ (15.1 m³) with tub extension, and requires 100 horsepower (75 kW)to operate. 

 

Instant quote available

The Supreme 500 Pull-Type has a maximum payload of 14,000 lbs (6,350 kg), a struck capacity of 394 ft³ (11.2 m³) or 459 ft³ (13.0 m³) with tub extension, and requires 100 horsepower (75 kW) to operate. 

 

Instant quote available

The Supreme 300 Pull-Type has a maximum payload of 6,000 lbs (2,722 kg), a struck capacity of 235 ft³ (6.7 m³) or 278 ft³ (7.9 m³) with tub extension, and requires 50 horsepower (37 kW) to operate. 

 

Instant quote available

The Supreme 400 Pull-Type has a maximum payload of 10,000 lbs (4,536kg), a struck capacity of 321 ft³ (9.1 m³) or 378 ft³ (10.7 m³) with tub extension, and requires 60 horsepower (45 kW) to operate. 

 

Instant quote available

The 1000T Pull-Type has a maximum payload of 30,000 lbs (13,608 kg), struck capacity of 779 ft³ (22.1 m³) or 897 ft³ (25.4 m³) with tub extension, and requires 170 horse power (127 kW). 

 

$9500.00

2594 hours, 22 ft wide, new water pump and radiator, new oil, overall good shape 

 

$20000.00

2178 hrs, 25 ft, New wobble box 1-year-old, Airco works, Triple delivery but set for single, Single knife, Plus guards 

 

Phone for pricing

1-3/8 21 spline cv PTO, 385/65R22.5RT tires, dogleg, right-hand dual discharge, DGstad02 scale, 10" rubber ext, taillights 

 

Phone for pricing

2019 Farm King Y1020SC rotary cutter, working width 186", cutting height 2 to 15 inches, blade overlap 7 inches, minimum tractor requirements 60hp 

 

Phone for pricing

21 spline CV PTO,500/45R20 walking beam, 41" walking beam frame, dogleg, dual discharge, hydraulic extender, scale, hard faced baffles, hard faced door, front shield magnets, 10" rubber extension, taillights, extra display for scale on left side. 

 

Phone for pricing

Our new 2021 Vermeer BPX9010 bale processors are in!!! This workhorse Vermeer Bale Processor combines simplicity, durability and versatility. The BPX9010 is an all-around processor that is ready to perform a variety of applications. It distributes a consistent, uniform windrow of crop along the bunk line or out in the pasture. Also, spread bedding with consistency and accuracy at ranges up to 50 ft (15.2 m). The BPX9010 bale processor simplifies the process of processing bales. 

 

Phone for pricing

50 Foot and 70 Foot Now in stock! 

 

Phone for pricing

The Fury is a high-speed compact disc that excels at managing difficult residue in challenging field conditions. Designed for high-speed operation, the Fury is more productive than traditional tillage since it operates at a field speeds of 8 - 12 mph (12 - 20 km/hr). 

 

Instant quote available

The new Versatile RT520 combine still features the unique rotating concave rotary system known for producing one of the cleanest samples in the industry. With more power for 2018, the RT520 also features a much larger cab and improved operator environment with a simple and ergonomic control console. For 2018, the RT520 receives a bump in horsepower and a new Tier 4 final QSG Cummins engine, offering power and efficiency. Other new features include an LED lighting package with more than twice the illumination of previous models. 

 

Phone for pricing

The Class VIII RT490 combine was designed to be rugged, reliable and simple to maintain and service. At the core of the Versatile RT490 is the revolutionary Rotating Concave Rotary System. A 360° concave wraps around a large rotor and counter-rotates. The counter rotation of the concave in relation to the rotor creates an unsurpassed threshing and separating area. 

 

Phone for pricing

PTO shaft with cam clutch, gearbox with freewheel ,transmission with belts (SCH SS 45 ST: in Poly-Chain® Carbon, SCH SS 55 DT: in XPC), transmission with side gearbox (SCH/GT 65 and SCH/GT 75), hydraulic side shifting (SCH/GT 75 DT excluded), welded steel counter-blades, enclosed machine body, inside lateral protections, double line protection chains 

 

Phone for pricing

Cam clutch on side PTO, PTO shaft with cam clutch, Gearbox with freewheel, Transmission with side gearbox, Hydraulic rear hood, Adjustable Hardox® counter-blade, Interchangeable steel counter-blades in Hardox®, interchangeable inner anti-wear plates in Hardox®, Anti dust machine body, Inside lateral protection, Protection chains 

 

Phone for pricing

PTO shaft (STCH/HD), cam clutch on side PTO (STCH/HD), PTO shaft with cam clutch (STCH), gearbox with freewheel, transmission with belts in XPC, hydraulic hood, flat pressed welded steel counter-blades, adjustable Hardox® counter-blade, inner anti wear clad Hardox® plates (STCH/HD), adjustable skids, penetration skids, adjustable extended 3 point linkage (STCH/HD), enclosed machine body, inside lateral protection, dual row protection chains 

 

Phone for pricing

PTO shaft with cam clutch, gearbox with freewheel, transmission with belts in Poly-V L, hydraulic hood, adjustable skids, penetration skids, enclosed machine body (STC/DT), inside lateral protection, dual row protection chains, flat pressed welded steel counter-blades, adjustable Hardox® counter-blade. 

 

Phone for pricing

PTO shaft with cam clutch, transmission with belts in Poly-Chain® Carbon, gearbox with freewheel, hydraulic hood, flat pressed welded steel counter-blades, adjustable Hardox® counter-blade, penetration skids, enclosed machine body, inside lateral protection, dual row protection chains 

 

Phone for pricing

Friction clutch on side PTO, PTO shaft with cam clutch, Gearbox with freewheel, Transmission with side gearbox, Side gearbox with oil cooling system, Hydraulic rear hood, Forged and hardened interchangeable counter-blades, Adjustable hardox® counter-blade, Inner anti wear clad plates FCP, Interchangeable inner antiwear plates in Hardox®, Adjustable extended 3 point linkage, Anti dust machine body, Hydraulic top link, Z style self ranging system of the PTO drive shaft/gearbox, Hydraulic hoses integrated in the frame, Cylinder protection, Inside lateral protection, Protection chains 

 

Phone for pricing

PTO shaft with cam clutch, gearbox with freewheel, transmission with belts in Poly-Chain® Carbon, hydraulic hood, welded steel counter-blades, adjustable Hardox® counter-blade, inner anti wear clad plates FCP, enclosed machine body, inside lateral protections, dual row protection chains 

 

Phone for pricing

friction clutch on side PTO, PTO shaft with cam clutch, gearbox with freewheel, transmission with side gearbox, hydraulic hood, flat pressed welded steel, counter-blades, adjustable Hardox® counter-blade, enclosed machine body, centralized greasing hub (SSH 200, 225 and 250), hydraulic top link (standard: SSH 200, 225, 250 - optional: SSH 150, 175), Z style self ranging system of the PTO drive shaft/gearbox (SSH 200, 225 and 250), inside lateral protections, protection chains 

 

Phone for pricing

friction clutch on side PTO, PTO shaft with cam clutch, gearbox with freewheel, transmission with side gearbox, hydraulic hood, welded steel counter-blades, flat pressed welded steel protection counter-blades, enclosed machine body, centralized greasing hub, hydraulic top link, Z style self ranging system of the PTO drive shaft/gearbox, inside lateral protections, bigger transmission for tractors up to 360-400 HP (SSM/HP 200, 225 and 250), protection chains 

 

Phone for pricing

Forestry tiller for tractors between 100 and 220 HP with a max grinding diameter of 30 cm/12" This Heavy Duty tiller is the smallest model in the wide range of FAE forestry tillers for depth soil reclamation. Several working widths are available, and thanks to its low weight and smart design, the model can be used on smaller jobs and in areas with difficult access. 

 

Phone for pricing

Forestry tiller for tractors between 100 and 220 HP with a max grinding diameter of 30 cm/12''. This forestry tiller is designed to meet the needs of professionals working the soil both on the surface and deeply. It is in fact a dual purpose machine mulcher and forestry tiller: it mulches trees up to 30 cm/12" in diameter and additionally grinds stumps down to a depth of 30 cm. The special gear transmission provides the ideal rotor RPM for outstanding mulching and in-ground stump grinding. The wide range of options and accessories make the machine extremely versatile and suited to multiple applications. The optional guide frame is located on the roller to be more efficient when mulching trees, and the counter knife is adjustable to set the size of the final product. Multiple tooth options are available for different applications and working conditions. 

 

Phone for pricing

PTO shaft, gearbox with freewheel, gearbox with oil cooling system, transmission with belts in Poly-Chain® Carbon, hydraulic hood, forged and hardened interchangeable counter-blades, third row of interchangeable forged and hardened counter-blades, inner anti wear clad plates FCP, adjustable skids, adjustable extended 3 point linkage, enclosed machine body, centralized greasing hub, hydraulic top link, hydraulic clutch transmission, hydraulic hoses integrated in the frame, Z style self ranging system of the PTO drive shaft/gearbox, cylinder protection,, inside lateral protection, dual row protection chains 

 

Phone for pricing

PTO shaft, cam clutch on side PTO, gearbox with freewheel, transmission w/ belts in XPC, hydraulic hood, forged and hardened interchangeable counter-blades, third row of interchangeable forged and hardened counter-blades, inner anti wear clad plates FCP, adjustable skids, adjustable extended 3 point linkage, enclosed machine body, centralized greasing hub, hydraulic top link, hydraulic hoses integrated in the frame, Z style self ranging system of the PTO drive shaft/gearbox, cylinder protection, stronger HP transmission for tractors up to 450 HP, dual row protection chains, protection plates for bolt-on chains 

 

Phone for pricing

PTO shaft with cam clutch, gearbox with freewheel, transmission with belts in Poly-V Kevlar, hydraulic hood,forged and hardened interchangeable counter-blades,three rows of forged and hardened interchangeable counter-blades,inner anti wear clad plates FCP, adjustable skids, 

 

Phone for pricing

PTO shaft with cam clutch, gearbox with freewheel, transmission with belts in XPB, hydraulic hood, forged and hardened interchangeable counter-blades, interchangeable inner antiwear plates in Hardox®, adjustable skids, enclosed machine body, centralized greasing hub, hydraulic top link, Z style self ranging system of the PTO drive shaft/gearbox, hydraulic hoses integrated in the frame, cylinder protection, dual row protection chains 

 

Phone for pricing

PTO shaft with cam clutch, gearbox with freewheel, hydraulic hood, enclosed machine body, centralized greasing hub, hydraulic hoses integrated in the frame, cylinder protections, adjustable skids, transmission with XPB belts, interchangeable bolted on spike counter blade, inner anti wear FCP plates, bolted on protection chains 

 

Phone for pricing

PTO shaft (FML/DT), PTO shaft with cam clutch (UML/DT), gearbox with freewheel, transmission with belts in XPB, hydraulic rear hood (FML/DT: by means of two cylinders), welded steel counter-blades, adjustable skids, enclosed machine body, protection chains. 

 

Phone for pricing

PTO shaft with cam clutch, gearbox with freewheel transmission with belts in XPB, hydraulic rear hood, welded steel counter-blades, adjustable skids, reinforced heavy duty frame to increase axial loads, protection chains 

 

Phone for pricing

PTO shaft (FML/ST), PTO shaft with cam clutch (UML/ST), gearbox with freewheel, transmission with belts in XPB, rear hood, welded steel counter-blades, adjustable skids, protection chains 

 

Phone for pricing

PTO shaft, friction clutch on side PTO, gearbox with freewheel, cooling system (SFH/HP) for gearbox, transmission with side gearbox, cooling system (SFH/HP) for side gearbox, hydraulic hood, forged and hardened interchangeable counter-blades, third row of interchangeable forged and, hardened counter-blades, adjustable Hardox® counter-blade, inner anti wear clad plates FCP, adjustable extended 3 point linkage, enclosed machine body, centralized greasing hub, hydraulic top link, Z style self ranging system of the, PTO drive shaft/gearbox, hydraulic hoses integrated in the frame, cylinder protection, inside lateral protections, protection chains 

 

Phone for pricing

This McCormick tractor has a BetaPower 4.5L 4-cyl diesel Engine with 540/1000 PTO and comes with a loader/grapple! 

 

Phone for pricing

29.6'-35.6', Stone flex hanger, Full floating hitch, Tandem walking beam. 

 

Phone for pricing

MFWD,164HP,L456 Quicke Ldr w/grapple, Power Shuttle, 3PT Hitch, Radio, A/C, Heat. 

 

Phone for pricing

Model ranges in lengths of 50' - 104' accompanied by 10,13 & 16" tube sizes. 

 

Phone for pricing

offset discs are avail in weight classes from 550-1050 lb/ft. 

 

Phone for pricing

We have several Farm King Snow blowers, please stop by to see one of our options. Cutting width of 74" and a height of 30", 24" fan diameter 

 

Phone for pricing

Ideal for your acreage. 72" cutting with. The Farm king rotary Cutter 620 

 

Phone for pricing

This little sized farm king finishing mower is perfect for your acreage, not too big so it can easy go in smaller spots and not to small, so it won't take forever to cut your grass. 

 

Phone for pricing

Farm King has a collection of rotary tiller models to suit your garden and landscaping needs. The 4560 has a Tillage width of 55", side shift of 6 3/4" 

 

Phone for pricing

These rear blades have been precisely built, with particular attention to the pivot point. The tight tolerances minimize metal-on-metal wear and allows for accurate adjustments and longer blade life. 

 

Phone for pricing

22HP, 2 Row Bench Seating, CVT with 4WD, Hydraulic Power Steering, 1325lb payload capacity, 12" ground clearance. 

 

Phone for pricing

MFWD, 45HP, Deluxe Cab, Loader w/bucket, Grill guard, Diff lock, Turn Assist Control. 

 

Phone for pricing

Twin, Net wrap, Bale diameter 72", Bale width 61", LED maintenance lights, Fire extinguisher, Flotation tires, Bale ramp. 

 

Phone for pricing

Raking your windrows with the Farm King easy rake eliminates numerous field passes and provides uniform rows. The Farm King easy rake comes available with 10, 12 and 14 wheel tine configurations and working widths of 21, 24 and 27 respectively. Each rake wheel comes with a fully independent suspension spring and bounce adjustment chain. The adjustable chain prevents the rake wheels from gouging uneven field terrain but allow the wheels to stay closely conformed to the field surface. 10, 12 & 14 wheel, Working width 20.7', 24.4' & 27.2', Tool-free windrow adjustment, Independent rake wheel suspension.