The NovaCat 442 is one of Pottinger rear Mower Conditioner/Disc with center pivot mounting it has a working width of 14'1", PTO Speed is 1000RMP, minimum 110 HP needed.
come and take a look as Best prices are now!
Recon represents a cutting-edge hay conditioning solution, greatly reducing the drying time of your swaths by 30 - 65%. The unique roller design of the Recon ensures exceptional moisture release through its exclusive crimping frequency and can be customized with a Mounted Tedder and Side Deflectors for full management of swath structure and airflow. Ag Shield's Recon hay conditioner empowers you with enhanced control during hay harvesting, enabling you to optimize the quality of your output.
This Trailed mower has a Cutting width of 20.8 ft, 1000 RPM PTO, a recommendation of 105 PTO HP, 3 double-acting hydraulics, 6 GPM, 14 discs, cutting height of 1" to 3"
You Can Now Triple Your Efficiency by delivering a clean cut and a wide cutting width that is ideal for large-acreage producers.
this unit features a total combined working width of up to 32.58 ft
taking productivity to a whole new level.
You Can Now Triple Your Efficiency with a working width of 32.58ft
This unit has a working width, including windrow of 13'10", a clean swept width of 9'2", and a windrow width of 4'3"
It has a PTO speed of 540 RPM, with a minimum PTO power requirement 30 HP.
This rotary cutter has a 72inch cutting width and a cutting height of between 2inch - 12inch, a minimum HP requirement of 30HP, PTO slip clutch protected.
This rotary cutter has a cutting width of 84inches with a changeable cutting height between 2 - 12 inches, this unit has a minimum HP requirement of 30 HP, PTO slip clutch protected.
This rotary cutter has a cutting width of 72 inches and has a changeable cutting height between 2 - 12 inches, minimum HP requirement of 30 HP, PTO slip clutch protected.
This Farm King RSB9 sickle bar mower has a working width of 9' and a working speed of 9mph This sickle bar mower comes has a 3 pt hitch cat I / II and hydraulic lift, its HP requirements are 40hp and this unit has a weight of 711 lb
this unit has side pull, 6 discs, rubber roller conditioner, 540 PTO, cutting width of 9.1ft, minimum cutting height 1 inch, maximum cutting height 8 inches, minimum of 65 HP required. Hydraulic flow rate required 6 GPM.
This homeowners series finishing mower has a cutting width of 60", and a cutting height of 1-1/2" to 5-1/2". Tractor requirements 12-25hp. Weight 442lb.
This little sized farm king finishing mower is perfect for your acreage, not too big so it can easy go in smaller spots and not to small, so it won't take forever to cut your grass.