Blowout Sale

$35,660

Minimum raking width 18ft, maximum raking width 23 ft, minimum windrow width 36 inches, maximum windrow width 72 inches. Tractor requirements 35 HP and 8 GPM hydraulic flow rate, 2 double acting hydraulics required. Was $38,265.00 

 

$34,900

Tedding width of 25ft, 6 baskets, 540 PTO, minimum 47HP, 1 double acting hydraulic with floating position Was $39,100.00 

 

$13,050

Tedding width 19 ft, 4 baskets, minimum 25 PTO HP. Was $14,800.00 

 

$104,800

Max net load 25000 lbs, min PTO HP 180, 1000 rpm CV PTO, 7 knifes per auger. Was $113,200.00 

 

$82,600

This unit is 660 cubic feet and has a max net load of 18,000 lbs, 2 screws, 5 knifes per screw, AR200 screw flighting, digi-star scale. Was $88,500.00 

 

$145,000

35.5', 10.5" spacing, hydraulic leveling, hydraulic depth control, T2-215 bearings, bearing wear plates, bearing trash guard, 26" * 3/8" notched front and rear, interlocking half spools, tire upgrade main frame only. Was $150,300.00 

 

$64,600

15ft wide, 10.5" spacing, bearing wear plate, bearing trash guard, 28" notched blades front and back, interlocking half spools, hydraulic depth control, hydraulic leveling, wrench kit Was $73,300.00 

 

$89,000

Pull-type feed mixer. Maximum payload 24,000 lbs, capacity with tub extension 841 ft³. Tractor power 130HP. Height 127", comes with scale. Was $93,700.00 

 

$166,600

smooth blades front, rear blades rear, steel basket. Was $185,000.00 

 

$198,950

This Vertical Tillage unit is 25 ft wide and has 2 middle rows with notched blades, Cat 4 articulating hitch, hydraulic adjustable harrows and hydraulic adjustable single roller. Was $215,000.00 

 

$25,700

Tedding width 22'4", 6 rotors, minimum 45 hp. Was $29,000.00 

 

$35,900

Tedding width 29', 8 rotors, transport chassis. +60 HP required Was $41,000.00 

 

$136,200

Tandem control, working width 26'3", power requirement 270HP. Was $148,900.00 

 

$19,000

Tedding width 19.6 feet, 540 PTO. Was $22,000.00 

 

$4,450

M.K. Martin RT606 rotary tiller has a maximum tillage depth of, 6.5", rotor diameter 17", requires 20-50hp unit is 60" wide. Was $5,605.00 

 

$62,100

1 swath 15'3" - 28'3". 2 swaths 28'10". Minimum 80 PTO HP. Was $65,360.00 

 

$4,390

Overall tillage width 55", tractor requirement 25 - 40 HP, slip clutch, heavy-duty oil bath gearbox Was $6,013.00 

 

$5,790

This rotary cutter has a cutting width of 84inches with a changeable cutting height between 2 - 12 inches, this unit has a minimum HP requirement of 30 HP, PTO slip clutch protected. Was $7,900.00 

 

$1,850

This harrow is great for leveling driveways, parking lots etc. The stirring motion of the harrow prepares a top quality seed bed for grass, saplings and other various foliage. Was $2,550.00 

 

$2,150

This harrow is great for leveling driveways, parking lots etc. The stirring motion of the harrow prepares a top quality seed bed for grass, saplings and other various foliage. Was $3,010.00 

 

$16,000

This roller is 18" x 10" mill. 8 grooves per inch, 200 - 300 bu/hr, discharge auger, stand, tires, chrome rollers Was $16,900.00 

 

$2,600

Farm King Grading Scrapers have 2 main features; Replaceable heat-treated scarifier shanks and reversible Grading blades Was $2,750.00 

 

$4,200

Cutting width / height - 60" / 25", Weight 470 lb, 20-40 HP, 4 Blade Fan. Was $5,400.00 

 

$5,050

Cutting width/height - 66"/24", Weight 515 lb, 20-40 hp, 4 Blade Fan. Was $6,300.00 

 

$1,500

Farm King C84SS 84" Blade Rear has manual blade angling with 5 positions, 40 Degrees left / right. 20-40 HP. Was $1,850.00 

 

$5,300

This Vermeer tedders have a Tedding width of 10 ft with 2 baskets and 6 tine arms per basket. 15 PTO HP required (540 RPM). Was $6,100.00