Vermeer MC2800 Mower Conditioner

this unit has side pull, 6 discs, rubber roller conditioner, 540 PTO, cutting width of 9.1ft, minimum cutting height 1 inch, maximum cutting height 8 inches, minimum of 65 HP required. Hydraulic flow rate required 6 GPM.

Vermeer Rake VR1224

This unit Requires 30hp with Hydraulic type one double-acting and requires 5 GPM flow. It has a Maximum raking speed of 14 mph, minimum raking width of 19.9 ft /maximum raking width of 24.4 ft, minimum windrow width of 21 inches /maximum windrow width of 98 inches

New Vermeer 605N

Like all Vermeer products, the 605N Vermeer baler is built to last Baler diameter is 72 inches, baler width is 61". this unit requires 80 HP, recommended 100 HP

Vermeer R2300 Rake

Minimum raking width 18ft, maximum raking width 23 ft, minimum windrow width 36 inches, maximum windrow width 72 inches. Tractor requirements 35 HP and 8 GPM hydraulic flow rate, 2 double acting hydraulics required.

Vermeer TD190 tedder

Tedding width of 19.5 ft unit has 4 baskets with 6 tines per arm, its PTO HP requirement are 25, and has 1 single-acting hydraulic, PTO drive 540 rpm

Vermeer VR1022 rake

The Vermeer VR1022 rake has a Raking width of 19' - 22.5' and windrow width of 19" - 82". Unit has 10 raking wheels in total.