Vermeer

$34,900

Tedding width of 25ft, 6 baskets, 540 PTO, minimum 47HP, 1 double acting hydraulic with floating position Was $39,100.00 

 

$13,050

Tedding width 19 ft, 4 baskets, minimum 25 PTO HP. Was $14,800.00 

 

$104,800

Max net load 25000 lbs, min PTO HP 180, 1000 rpm CV PTO, 7 knifes per auger. Was $113,200.00 

 

$5,300

This Vermeer tedders have a Tedding width of 10 ft with 2 baskets and 6 tine arms per basket. 15 PTO HP required (540 RPM). Was $6,100.00 

 

Phone for pricing

This Bale Processor is an all-around processor ready to perform a variety of applications that will Distribute a consistent, uniform windrow of crop along the bunk line or out in the pasture. Or spread bedding with consistency and accuracy at ranges up to 50 ft (15.2 m). 

 

Phone for pricing

This unit is 660 cubic feet and has a max net load of 18,000 lbs, 2 screws, 5 knifes per screw, AR200 screw flighting, digi-star scale. Was $88,500.00 

 

Phone for pricing

Minimum raking width 18ft, maximum raking width 23 ft, minimum windrow width 36 inches, maximum windrow width 72 inches. Tractor requirements 35 HP and 8 GPM hydraulic flow rate, 2 double acting hydraulics required. 

 

Phone for pricing

Its raking width is between 19 ft and 28 ft and windrow width is between 30 inches and 84 inches. Units minimum HP requirements is 70 and has 2 double-acting hydraulics with a flow rate of min 8 gal/min 

 

Phone for pricing

This rake has a raking width of 19.9 ft to 24.4 ft and a windrow width of 21 inchs to 98 inchs. 

 

Phone for pricing

The Vermeer VR1022 rake has a Raking width of 19' - 22.5' and windrow width of 19" - 82". Unit has 10 raking wheels in total. 

 

Phone for pricing

Tedding width of 19.5 ft unit has 4 baskets with 6 tines per arm, its PTO HP requirement are 25, and has 1 single-acting hydraulic, PTO drive 540 rpm 

 

Phone for pricing

This Vermeer select baler can make bales with a bale width of 61" and max bale weight of 2400lbs. It has a minimum of 80 PTO HP but recommended 100 PTO HP. New Units comming in soon! 

 

Phone for pricing

This Vermeer Tedder has a Tedding width of 33'6", 8 baskets, 540 PTO drive. 60 HP required and 2 double acting hydraulic outlets with floating position. 

 

Phone for pricing

This unit has 8 discs and a cutting width of 10.5 ft, 540 rpm, recommended drawbar HP 60 HP and 2 double acting valves 6gpm. 

 

Phone for pricing

The versatility of G3 Pro balers allows you to decide how to make hay! You can Bale it wet or dry and decide if you would like to Chop the hay with 8, 9, or all 17 knives or don't chop it at all the choice is yours. The 504 Pro G3 baler is how to win the day when making high-quality hay. 

 

Phone for pricing

Like all Vermeer products, the 605N Vermeer baler is built to last Baler diameter is 72 inches, baler width is 61". this unit requires 80 HP, recommended 100 HP 

 

Phone for pricing

This unit Requires 30hp with Hydraulic type one double-acting and requires 5 GPM flow. It has a Maximum raking speed of 14 mph, minimum raking width of 19.9 ft /maximum raking width of 24.4 ft, minimum windrow width of 21 inches /maximum windrow width of 98 inches 

 

Phone for pricing

this unit has side pull, 6 discs, rubber roller conditioner, 540 PTO, cutting width of 9.1ft, minimum cutting height 1 inch, maximum cutting height 8 inches, minimum of 65 HP required. Hydraulic flow rate required 6 GPM.