KNM Saleshttps://www.knmsales.com745Kioti CX2510 HSTGreat for your acreage! Kioti CX2510 tractor with KL2510C loader. Engine gross Power 24.5 HP, 3 cylinder, diesel, hydrostatic transmission, max travel speed 21.7 km/h. 0% financing available.in stocknew0.00 CADhttps://www.knmsales.com/kioti-cx2510-hst/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kioti-cx2510-hst2022_summer.01.jpgKioti743Farm king 60" rear bladeFarm King has been building a wide variety of rear blades for several decades. These blades are built using more steel, which adds strength, longevity and durability to each blade. Farm King rear blades are capable of tackling tough scraping projects. These rear blades have been precisely built, with particular attention to the pivot point. The tight tolerances minimize metal-on-metal wear and allows for accurate adjustments and longer blade life. Farm King Rear Blades are quick hitch compatible and the parking stand is standard equipment.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-60-rear-blade/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/60-rear-blade_summer.1.jpgFarm king744Farm King 72" side shift bladeFarm King has been building a wide variety of rear blades for several decades. These blades are built using more steel, which adds strength, longevity and durability to each blade. Farm King rear blades are capable of tackling tough scraping projects. These rear blades have been precisely built, with particular attention to the pivot point. The tight tolerances minimize metal-on-metal wear and allows for accurate adjustments and longer blade life. Farm King Rear Blades are quick hitch compatible and the parking stand is standard equipment.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-72-side-shift-blade/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/72-side-shift-blade_summer.1.jpgFarm King37Farm King Easy RakeRaking your windrows with the Farm King easy rake eliminates numerous field passes and provides uniform rows. The Farm King easy rake comes available with 10, 12 and 14 wheel tine configurations and working widths of 21, 24 and 27 respectively. Each rake wheel comes with a fully independent suspension spring and bounce adjustment chain. The adjustable chain prevents the rake wheels from gouging uneven field terrain but allow the wheels to stay closely conformed to the field surface. 10, 12 & 14 wheel, Working width 20.7', 24.4' & 27.2', Tool-free windrow adjustment, Independent rake wheel suspension.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-easy-rake/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/1_farm-king-rakes.0.jpgFarm King193Farm King AugersModel ranges in lengths of 50' - 104' accompanied by 10,13 & 16 tube sizes.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-augers/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/backsaver_auger_4c.jpgFarm King65Farm King-Allied Rear BladesThese rear blades have been precisely built, with particular attention to the pivot point. The tight tolerances minimize metal-on-metal wear and allows for accurate adjustments and longer blade life.in stocknew0.00 CADhttps://www.knmsales.com/allied-rear-blades/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/allied-6096.jpgFarm King66Farm King Rotary TillersFarm King has a collection of rotary tiller models to suit your garden and landscaping needs. The 4560 has a Tillage width of 55, side shift of 6 3/4in stocknew0.00 CADhttps://www.knmsales.com/farm-king-rotary-tillers/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/fk-rt_1024x768.jpgFarm King67Farm King Finishing MowersThis little sized farm king finishing mower is perfect for your acreage, not too big so it can easy go in smaller spots and not to small, so it won't take forever to cut your grass.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-finishing-mowers/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/detail_farmking_finishing_mower.jpgFarm King68Farm King Rotary Cutter'sIdeal for your acreage. 72 cutting with. The Farm king rotary Cutter 620in stocknew0.00 CADhttps://www.knmsales.com/farm-king-rotary-cutters/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/rc-lb-02.jpgFarm King69Farm King Snow Blower'sWe have several Farm King Snow blowers, please stop by to see one of our options. Cutting width of 74 and a height of 30, 24 fan diameterin stocknew0.00 CADhttps://www.knmsales.com/farm-king-snow-blowers/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/fk-sb_6x4-2.jpgFarm King96Versatile Offset Discoffset discs are avail in weight classes from 550-1050 lb/ft.in stocknew0.00 CADhttps://www.knmsales.com/2015-versatile-sd650/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/img_1626.jpgVersatile772Kioti PX1153 tractorpower shuttle, R14 tires, 3 remotes, loader, bucket, 110 HP,in stocknew0.00 CADhttps://www.knmsales.com/kioti-px1153-tractor/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kioti-px1153-tractor_summer.1.jpgKioti775Farm King YGS84 Grading scraperFarm King Grading Scrapers have 2 main features; Replaceable heat-treated scarifier shanks and reversible Grading bladesin stocknew0.00 CADhttps://www.knmsales.com/farm-king-84-grading-scraper/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-84inch-grading-scraper_summer.1.jpgFarm King776Farm King YGS72 Grading ScraperFarm King Grading Scrapers have 2 main features; Replaceable heat-treated scarifier shanks and reversible Grading bladesin stocknew0.00 CADhttps://www.knmsales.com/farm-king-ygs72-grading-scraper/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-ygs72-grading-scraper_summer..1.jpgFarm King194McCormick X6.470MFWD,164HP,L456 Quicke Ldr w/grapple, Power Shuttle, 3PT Hitch, Radio, A/C, Heat.in stocknew0.00 CADhttps://www.knmsales.com/2016-mccormick-x6.470/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/00e8a9e95e1e5d7fa95ea42c25b3670bce091913.jpgMcCormick759Kuhn FC4060 TCR Trailed mower conditionerWorking width 13', swath width 3'7 - 11'9, requires 107 hp. The diamond block conditioning rollers stand out. The horizontal staggered diamond pattern gives more points for the crop to be crimped as it flows off the disc at an angle. Externally removable disc bearings, outstanding crop lift, Fast-Fit knives. The Optidisc cutter bar is lubed for life.in stocknew0.00 CADhttps://www.knmsales.com/kuhn-fc4060-tcr-trailed-mower-conditioner/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kuhn-fc4060-tcr-trailed-mower-conditioner_summer.1.jpgKuhn229Versatile Tandem Disc29.6'-35.6', Stone flex hanger, Full floating hitch, Tandem walking beam.in stocknew0.00 CADhttps://www.knmsales.com/versatile-tandem-disc/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/ys5g5121a_lr.jpgVersatile7692009 Unverferth GC-9250 grain cartThis grain cart is in good shape with a new tarp.in stockused40000.00 CADhttps://www.knmsales.com/2009-unverferth-gc-9250-grain-cart/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/2009-unvjerferth-gc-9250-grain-cart_summer.1.jpgUnverferth770Farm King Y1003DH drag harrow100 DRAG HARROW w/3 - 40 parallel harrowsin stocknew0.00 CADhttps://www.knmsales.com/farm-king-y1003dh-drag-harrow/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-y1003dh-drag-harrow_summer.1.jpgFarm King7502015 John Deere Moco 835 mowerPTO speed 1,000 rpm, Ball joint equal angle hitch, Cutterbar cutting width 3.5 m/11.5 ft, 7 disks, 14 knivesin stockused30000.00 CADhttps://www.knmsales.com/2015-john-deere-moco-835-mower/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/2015-john-deere-moco-835-mower.1.jpgJohn Deere752Vermeer TE3310 TedderTedding width 33.5 ft, 8 baskets, minimum HP requirement 60HP, 2 double-acting hydraulics, 540 PTO.in stocknew0.00 CADhttps://www.knmsales.com/vermeer-te3310-tedder/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/vermeer-te3310-tedder_summer.1.jpgVermeer753Farm King Y628S Rotary CutterCutting width 6', series II, 3 pt hitch, tailwheel, slip-clutch protection and safety chain kit.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-y628s-rotary-cutter/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-y628s-rotary-cutter_summer.1.jpgFarm King742Vermeer 604 PRO G3 silage baler540 PTO, HP recommended 120, bale diameter 36 - 72 inch, bale width 48 inches, max bale weight 2400 lbs, tires, 21.5L - 16.1 floatation tires, endless belts. This Vermeer G3 604 PRO baler was specially designed and built to handle the rigors of baling wet, heavy crops - combining strength and smart features while giving you the versatility of having a baler that can bale dry hay as well.in stocknew0.00 CADhttps://www.knmsales.com/vermeer-604-pro-g3-silage-baler/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/604-pro-g3_summer.1.jpgVermeer778Versatile tandem discThis unit is 35'5 wide and has T2.215 bearings, 26 x 3/8 notched blades front and rear, mainframe tire upgrade, hydraulic depth control, hydraulic levelling control, interlocking half spools.in stocknew0.00 CADhttps://www.knmsales.com/products/versatile-tandem-disc/591/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/versatile-tandem-disc_summer.1.jpgVersatile282McCormick X6.430This McCormick tractor has a BetaPower 4.5L 4-cyl diesel Engine with 540/1000 PTO and comes with a loader/grapple!in stocknew0.00 CADhttps://www.knmsales.com/mccormick-x6.430/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/mccormick-x6.430.jpgMcCormick X6.430771Farm King Y1002DH drag harrow100 DRAG HARROW with 1 - 40 and 1 – 60 parallel harrowin stocknew0.00 CADhttps://www.knmsales.com/farm-king-y1002dh-drag-harrow/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/drag-harrow.1.jpgFarm King323Kioti NX 4510 with loader and snow blowerTractor Loader with Snow Blower and front loader. This winter package leaves your driveway clean this year! And with heated cab a must have for all acreage owners.in stocknew0.00 CADhttps://www.knmsales.com/kioti-nx-4510-with-loader-and-snow-blower/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/photo7.jpgKioti346Stone Crushers/Forestry Tillers SFH - SFH/HPPTO shaft, friction clutch on side PTO, gearbox with freewheel, cooling system (SFH/HP) for gearbox, transmission with side gearbox, cooling system (SFH/HP) for side gearbox, hydraulic hood, forged and hardened interchangeable counter-blades, third row of interchangeable forged and, hardened counter-blades, adjustable Hardox® counter-blade, inner anti wear clad plates FCP, adjustable extended 3 point linkage, enclosed machine body, centralized greasing hub, hydraulic top link, Z style self ranging system of the, PTO drive shaft/gearbox, hydraulic hoses integrated in the frame, cylinder protection, inside lateral protections, protection chainsin stocknew0.00 CADhttps://www.knmsales.com/stone-crushers/forestry-tillers-sfh-sfh/hp/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/sfh-hp_multitasks_stone_crushers_forestry_tillers_1.jpgFEA Group354Forestry Mulcher UML/S - FML/STPTO shaft (FML/ST), PTO shaft with cam clutch (UML/ST), gearbox with freewheel, transmission with belts in XPB, rear hood, welded steel counter-blades, adjustable skids, protection chainsin stocknew0.00 CADhttps://www.knmsales.com/forestry-mulcher-uml-s-fml-st/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/uml-st_forestry_mulchers_1.jpgFAE Group355Forestry Mulcher UML/LOWPTO shaft with cam clutch, gearbox with freewheel transmission with belts in XPB, hydraulic rear hood, welded steel counter-blades, adjustable skids, reinforced heavy duty frame to increase axial loads, protection chainsin stocknew0.00 CADhttps://www.knmsales.com/forestry-mulcher-uml-low/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/uml-low_forestry_mulchers_1.jpgFAE Group356Forestry Mulcher UML/DT - FML/DTPTO shaft (FML/DT), PTO shaft with cam clutch (UML/DT), gearbox with freewheel, transmission with belts in XPB, hydraulic rear hood (FML/DT: by means of two cylinders), welded steel counter-blades, adjustable skids, enclosed machine body, protection chains.in stocknew0.00 CADhttps://www.knmsales.com/forestry-mulcher-uml-dt-fml-dt/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/uml-dt-hd_forestry_mulchers_1.jpgFAE Group357Forestry Mulcher UML/S/DTPTO shaft with cam clutch, gearbox with freewheel, hydraulic hood, enclosed machine body, centralized greasing hub, hydraulic hoses integrated in the frame, cylinder protections, adjustable skids, transmission with XPB belts, interchangeable bolted on spike counter blade, inner anti wear FCP plates, bolted on protection chainsin stocknew0.00 CADhttps://www.knmsales.com/forestry-mulcher-uml-s-dt/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/uml-s-dt_forestry_mulchers_1.jpgFAE Group358Forestry Mulcher UMM/DTPTO shaft with cam clutch, gearbox with freewheel, transmission with belts in XPB, hydraulic hood, forged and hardened interchangeable counter-blades, interchangeable inner antiwear plates in Hardox®, adjustable skids, enclosed machine body, centralized greasing hub, hydraulic top link, Z style self ranging system of the PTO drive shaft/gearbox, hydraulic hoses integrated in the frame, cylinder protection, dual row protection chainsin stocknew0.00 CADhttps://www.knmsales.com/forestry-mulcher-umm/dt/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/umm-dt_forestry_mulchers_1_copy2.jpgFAE Group359Forestry Mulcher UMM/S - UMM/S/HPPTO shaft with cam clutch, gearbox with freewheel, transmission with belts in Poly-V Kevlar, hydraulic hood,forged and hardened interchangeable counter-blades,three rows of forged and hardened interchangeable counter-blades,inner anti wear clad plates FCP, adjustable skids,in stocknew0.00 CADhttps://www.knmsales.com/forestry-mulcher-umm/s-umm/s/hp/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/umm-s-hp_forestry_mulchers_1.jpgFAE Group360Forestry Mulcher UMH/S - UMH/S/HPPTO shaft, cam clutch on side PTO, gearbox with freewheel, transmission w/ belts in XPC, hydraulic hood, forged and hardened interchangeable counter-blades, third row of interchangeable forged and hardened counter-blades, inner anti wear clad plates FCP, adjustable skids, adjustable extended 3 point linkage, enclosed machine body, centralized greasing hub, hydraulic top link, hydraulic hoses integrated in the frame, Z style self ranging system of the PTO drive shaft/gearbox, cylinder protection, stronger HP transmission for tractors up to 450 HP, dual row protection chains, protection plates for bolt-on chainsin stocknew0.00 CADhttps://www.knmsales.com/forestry-mulcher-umh/s-umh/s/hp/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/umh-s-hp_forestry_mulchers_1_copy1.jpgFAE Group361Forestry Mulcher UMH MEGAPTO shaft, gearbox with freewheel, gearbox with oil cooling system, transmission with belts in Poly-Chain® Carbon, hydraulic hood, forged and hardened interchangeable counter-blades, third row of interchangeable forged and hardened counter-blades, inner anti wear clad plates FCP, adjustable skids, adjustable extended 3 point linkage, enclosed machine body, centralized greasing hub, hydraulic top link, hydraulic clutch transmission, hydraulic hoses integrated in the frame, Z style self ranging system of the PTO drive shaft/gearbox, cylinder protection,, inside lateral protection, dual row protection chainsin stocknew0.00 CADhttps://www.knmsales.com/forestry-mulcher-umh-mega/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/umh-mega_forestry_mulchers_1_copy2.jpgFAE Group362SSL Speed Forestry TillerForestry tiller for tractors between 100 and 220 HP with a max grinding diameter of 30 cm/12''. This forestry tiller is designed to meet the needs of professionals working the soil both on the surface and deeply. It is in fact a dual purpose machine mulcher and forestry tiller: it mulches trees up to 30 cm/12 in diameter and additionally grinds stumps down to a depth of 30 cm. The special gear transmission provides the ideal rotor RPM for outstanding mulching and in-ground stump grinding. The wide range of options and accessories make the machine extremely versatile and suited to multiple applications. The optional guide frame is located on the roller to be more efficient when mulching trees, and the counter knife is adjustable to set the size of the final product. Multiple tooth options are available for different applications and working conditions.in stocknew0.00 CADhttps://www.knmsales.com/ssl-speed-forestry-tiller/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/ssl_speed_forestry_tillers_1.jpgFAE363SSL Forestry TillerForestry tiller for tractors between 100 and 220 HP with a max grinding diameter of 30 cm/12 This Heavy Duty tiller is the smallest model in the wide range of FAE forestry tillers for depth soil reclamation. Several working widths are available, and thanks to its low weight and smart design, the model can be used on smaller jobs and in areas with difficult access.in stocknew0.00 CADhttps://www.knmsales.com/ssl-forestry-tiller/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/ssl_forestry_tillers_2.jpgFAE365SSM - SSM/HP Forestry Tillerfriction clutch on side PTO, PTO shaft with cam clutch, gearbox with freewheel, transmission with side gearbox, hydraulic hood, welded steel counter-blades, flat pressed welded steel protection counter-blades, enclosed machine body, centralized greasing hub, hydraulic top link, Z style self ranging system of the PTO drive shaft/gearbox, inside lateral protections, bigger transmission for tractors up to 360-400 HP (SSM/HP 200, 225 and 250), protection chainsin stocknew0.00 CADhttps://www.knmsales.com/ssm-ssm/hp-forestry-tiller/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/ssm-hp_forestry_tillers_6.jpgFAE Group366SSH Forestry Tillerfriction clutch on side PTO, PTO shaft with cam clutch, gearbox with freewheel, transmission with side gearbox, hydraulic hood, flat pressed welded steel, counter-blades, adjustable Hardox® counter-blade, enclosed machine body, centralized greasing hub (SSH 200, 225 and 250), hydraulic top link (standard: SSH 200, 225, 250 - optional: SSH 150, 175), Z style self ranging system of the PTO drive shaft/gearbox (SSH 200, 225 and 250), inside lateral protections, protection chainsin stocknew0.00 CADhttps://www.knmsales.com/ssh-forestry-tiller/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/ssh_stabilization_1.jpgFAE Group367Stone Crushers/forestry Tiller SFLPTO shaft with cam clutch, gearbox with freewheel, transmission with belts in Poly-Chain® Carbon, hydraulic hood, welded steel counter-blades, adjustable Hardox® counter-blade, inner anti wear clad plates FCP, enclosed machine body, inside lateral protections, dual row protection chainsin stocknew0.00 CADhttps://www.knmsales.com/stone-crushers-forestry-tiller-sfl/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/sfl_big(2).jpgFAE Group368Stone Crushers/Forestry Tiller SFMFriction clutch on side PTO, PTO shaft with cam clutch, Gearbox with freewheel, Transmission with side gearbox, Side gearbox with oil cooling system, Hydraulic rear hood, Forged and hardened interchangeable counter-blades, Adjustable hardox® counter-blade, Inner anti wear clad plates FCP, Interchangeable inner antiwear plates in Hardox®, Adjustable extended 3 point linkage, Anti dust machine body, Hydraulic top link, Z style self ranging system of the PTO drive shaft/gearbox, Hydraulic hoses integrated in the frame, Cylinder protection, Inside lateral protection, Protection chainsin stocknew0.00 CADhttps://www.knmsales.com/stone-crushers-forestry-tiller-sfm/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/sfm_multitasks_stone_crushers-forestry_tillers_1.jpgFAE Group369Stone Crushers STCLPTO shaft with cam clutch, transmission with belts in Poly-Chain® Carbon, gearbox with freewheel, hydraulic hood, flat pressed welded steel counter-blades, adjustable Hardox® counter-blade, penetration skids, enclosed machine body, inside lateral protection, dual row protection chainsin stocknew0.00 CADhttps://www.knmsales.com/stone-crushers-stcl/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/stcl_stone_crushers_1.jpgFAE Group370Stone Crushers STCPTO shaft with cam clutch, gearbox with freewheel, transmission with belts in Poly-V L, hydraulic hood, adjustable skids, penetration skids, enclosed machine body (STC/DT), inside lateral protection, dual row protection chains, flat pressed welded steel counter-blades, adjustable Hardox® counter-blade.in stocknew0.00 CADhttps://www.knmsales.com/stone-crushers-stc/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/stc_stone_crushers_1.jpgFAE Group371Stone Crushers STCH - STCH/HDPTO shaft (STCH/HD), cam clutch on side PTO (STCH/HD), PTO shaft with cam clutch (STCH), gearbox with freewheel, transmission with belts in XPC, hydraulic hood, flat pressed welded steel counter-blades, adjustable Hardox® counter-blade, inner anti wear clad Hardox® plates (STCH/HD), adjustable skids, penetration skids, adjustable extended 3 point linkage (STCH/HD), enclosed machine body, inside lateral protection, dual row protection chainsin stocknew0.00 CADhttps://www.knmsales.com/stone-crushers-stch-stch/hd/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/stch-hd_stone_crushers_1.jpgFAE Group372Stone Crushers RSMCam clutch on side PTO, PTO shaft with cam clutch, Gearbox with freewheel, Transmission with side gearbox, Hydraulic rear hood, Adjustable Hardox® counter-blade, Interchangeable steel counter-blades in Hardox®, interchangeable inner anti-wear plates in Hardox®, Anti dust machine body, Inside lateral protection, Protection chainsin stocknew0.00 CADhttps://www.knmsales.com/stone-crushers-rsm/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/rsm_stone_cruscher_1.jpgFAE Group415Versatile FURY HS.250The Fury is a high-speed compact disc that excels at managing difficult residue in challenging field conditions. Designed for high-speed operation, the Fury is more productive than traditional tillage since it operates at a field speeds of 8 - 12 mph (12 - 20 km/hr).in stocknew0.00 CADhttps://www.knmsales.com/versatile-fury-hs.250/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/fury.jpgVersatile373Stump Cutter SCH-SCH/GTPTO shaft with cam clutch, gearbox with freewheel ,transmission with belts (SCH SS 45 ST: in Poly-Chain® Carbon, SCH SS 55 DT: in XPC), transmission with side gearbox (SCH/GT 65 and SCH/GT 75), hydraulic side shifting (SCH/GT 75 DT excluded), welded steel counter-blades, enclosed machine body, inside lateral protections, double line protection chainsin stocknew0.00 CADhttps://www.knmsales.com/stump-cutter-sch-sch-gt/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/sch-gt_stump_cutters_1.jpgFAE Group754Farm King 9' rear bladeThis unit has hydraulic tilt, hydraulic angle control and skid shoes.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-9-rear-blade/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-9-rear-blade_summer.1.jpgFarm King392Versatile RT490 CombineThe Class VIII RT490 combine was designed to be rugged, reliable and simple to maintain and service. At the core of the Versatile RT490 is the revolutionary Rotating Concave Rotary System. A 360° concave wraps around a large rotor and counter-rotates. The counter rotation of the concave in relation to the rotor creates an unsurpassed threshing and separating area.in stocknew0.00 CADhttps://www.knmsales.com/versatile-rt490/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/2014-rt490.0.jpgVersatile393Combine Versatile RT520The new Versatile RT520 combine still features the unique rotating concave rotary system known for producing one of the cleanest samples in the industry. With more power for 2018, the RT520 also features a much larger cab and improved operator environment with a simple and ergonomic control console. For 2018, the RT520 receives a bump in horsepower and a new Tier 4 final QSG Cummins engine, offering power and efficiency. Other new features include an LED lighting package with more than twice the illumination of previous models.in stocknew0.00 CADhttps://www.knmsales.com/combine-versatile-rt520/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/1_versatile_combine.jpgVersatile436Vermeer BPX9010 Bale ProcessorOur new 2021 Vermeer BPX9010 bale processors are in!!! This workhorse Vermeer Bale Processor combines simplicity, durability and versatility. The BPX9010 is an all-around processor that is ready to perform a variety of applications. It distributes a consistent, uniform windrow of crop along the bunk line or out in the pasture. Also, spread bedding with consistency and accuracy at ranges up to 50 ft (15.2 m). The BPX9010 bale processor simplifies the process of processing bales.in stocknew0.00 CADhttps://www.knmsales.com/vermeer-bpx9010-bale-processor/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/2021-vermeer-bpx9010.1.jpgVermeer447Supreme International 900T Feed Wagon21 spline CV PTO,500/45R20 walking beam, 41 walking beam frame, dogleg, dual discharge, hydraulic extender, scale, hard faced baffles, hard faced door, front shield magnets, 10 rubber extension, taillights, extra display for scale on left side.in stocknew0.00 CADhttps://www.knmsales.com/supreme-international-900t-feed-wagon/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/1_900t-tandem.w.jpgSupreme4852019 Farm King Y1531 rotary cutter2019 Farm King Y1020SC rotary cutter, working width 186, cutting height 2 to 15 inches, blade overlap 7 inches, minimum tractor requirements 60hpin stocknew0.00 CADhttps://www.knmsales.com/farm-king-y1531-rotary-cutter/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/photo_2019-08-19_09-22-46.jpgFarm King487Segue SEG7T1-3/8 21 spline cv PTO, 385/65R22.5RT tires, dogleg, right-hand dual discharge, DGstad02 scale, 10 rubber ext, taillightsin stocknew0.00 CADhttps://www.knmsales.com/products/segue-seg7t/339/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/segue7t.3.jpgSupreme497Versatile 4750 swather2594 hours, 22 ft wide, new water pump and radiator, new oil, overall good shapein stockused9500.00 CADhttps://www.knmsales.com/products/versatile-4750-swather/348/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/versatile-4750.1.jpgVersatile503Supreme 1700TRThe 1000T Pull-Type has a maximum payload of 30,000 lbs (13,608 kg), struck capacity of 779 ft³ (22.1 m³) or 897 ft³ (25.4 m³) with tub extension, and requires 170 horse power (127 kW).in stocknew0.00 CADhttps://www.knmsales.com/supreme-1700tr/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/1700tr-_pull_type.pngSupreme505Supreme 400The Supreme 400 Pull-Type has a maximum payload of 10,000 lbs (4,536kg), a struck capacity of 321 ft³ (9.1 m³) or 378 ft³ (10.7 m³) with tub extension, and requires 60 horsepower (45 kW) to operate.in stocknew0.00 CADhttps://www.knmsales.com/supreme-400/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/400_-pull_type-1.pngSupreme506Supreme 300The Supreme 300 Pull-Type has a maximum payload of 6,000 lbs (2,722 kg), a struck capacity of 235 ft³ (6.7 m³) or 278 ft³ (7.9 m³) with tub extension, and requires 50 horsepower (37 kW) to operate.in stocknew0.00 CADhttps://www.knmsales.com/supreme-300/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/300-pull-type.1.jpgSupreme508Supreme 500 processorThe Supreme 500 Pull-Type has a maximum payload of 14,000 lbs (6,350 kg), a struck capacity of 394 ft³ (11.2 m³) or 459 ft³ (13.0 m³) with tub extension, and requires 100 horsepower (75 kW) to operate.in stocknew0.00 CADhttps://www.knmsales.com/supreme-500-processor/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/500_-pull_type.pngsupreme509Supreme 600 processorThe Supreme 600 Pull-Type has a maximum payload of 14,000 lbs (6,350 kg), a struck capacity of 465 ft³ (13.2 m³) or 534 ft³ (15.1 m³) with tub extension, and requires 100 horsepower (75 kW)to operate.in stocknew0.00 CADhttps://www.knmsales.com/supreme-600-processor/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/600_-pull_type.pngSupreme510500T supremeThe 500T Pull-Type has a maximum payload of 14,000 lbs (6,350 kg), struck capacity of 480 ft³ (13.6 m³) or 561 ft³ (15.9 m³) with tub extension, and requires 80 horse power (60 kW).in stocknew0.00 CADhttps://www.knmsales.com/500t-supreme/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/500t-supreme.pngSupreme511Supreme 600T Pull TypeThe 600T Pull-Type has a maximum payload of 14,000 lbs (6,350 kg), struck capacity of 543 ft³ (15.4 m³) or 635 ft³ (18.0 m³) with tub extension, and requires 100 horse power (75 kW).in stocknew0.00 CADhttps://www.knmsales.com/600t/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/600t-pulltype-600x600.pngSupreme512Supreme 700t processorThe 700T Pull-Type has a maximum payload of 14,000 lbs (6,350 kg), struck capacity of 565 ft³ (16.0 m³) or 649 ft³ (18.4 m³) with tub extension, and requires 100 horse power (75 kW).in stocknew0.00 CADhttps://www.knmsales.com/products/supreme-700t/362/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/700t-pulltype-600x600.pngSupreme513Supreme 800T Feed WagonThe 800T Pull-Type has a maximum payload of 18,000 lbs (8,165 kg), struck capacity of 650 ft³ (18.4 m³) or 745 ft³ (21.1 m³) with tub extension, and requires 115 horse power (86 kW).in stocknew0.00 CADhttps://www.knmsales.com/800t/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/800t_-pull_type.pngSupreme514900T SupremeThe 900T Pull-Type has a maximum payload of 24,000 lbs (10,886 kg), struck capacity of 731 ft³ (20.7 m³) or 841 ft³ (23.8 m³) with tub extension, and requires 130 horse power (97 kW).in stocknew0.00 CADhttps://www.knmsales.com/900t/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/900t-pulltype-single-axle-600x600.pngSupreme515Supreme 1000T Feed wagonThe 1000T Pull-Type has a maximum payload of 30,000 lbs (13,608 kg), struck capacity of 779 ft³ (22.1 m³) or 897 ft³ (25.4 m³) with tub extension, and requires 170 horse power (127 kW).in stocknew0.00 CADhttps://www.knmsales.com/1000t/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/1000t.pngSupreme516Versatile FURY High Speed DiscThe Fury is a high speed compact disc that excels at managing difficult residue in challenging field conditions. Designed for high speed operation, the Fury is more productive than traditional tillage since it operates at field speeds of 8 - 12 mph (12 - 20 km/hr). Two rows of blades set at a compound angle achieve a full cut at 2.5 (63 mm) working depth. This means no uneven ground surface left to hinder planting operations. 4 blade size options: 20 to 26 (508-660 mm) and the choice of 3 rear finishing attachments: round bar steel cage roller; corrugated rubber roller or a spring roller makes the Fury fully customizable for your local residue, field and moisture conditions.in stocknew0.00 CADhttps://www.knmsales.com/fury/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/fury.1.jpgVersatile522Versatile 380The Versatile 380 four-wheel articulated drive is designed to enhance the profitability of large scale farming operations while upholding the Versatile cornerstones of reliability, durability, and ease of service and maintenance.in stocknew0.00 CADhttps://www.knmsales.com/versatile-380/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/versatile-380.jpgVersatile523Versatile 405The Versatile 405 four-wheel articulated drive is designed to enhance the profitability of large scale farming operations while upholding the Versatile cornerstones of reliability, durability, and ease of service and maintenance.in stocknew0.00 CADhttps://www.knmsales.com/versatile-405/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/summer4.jpgVersatile524Versatile 430The Versatile 430 four-wheel articulated drive is designed to enhance the profitability of large scale farming operations while upholding the Versatile cornerstones of reliability, durability, and ease of service and maintenance.in stocknew0.00 CADhttps://www.knmsales.com/versatile-430/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/versatile-4wd-430.png.jpgVersatile525Versatile 460The Versatile 460 four-wheel articulated drive is designed to enhance the profitability of large scale farming operations while upholding the Versatile cornerstones of reliability, durability, and ease of service and maintenance.in stocknew0.00 CADhttps://www.knmsales.com/products/versatile-460/374/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/1_versatile-460.0.jpgVersatile528Versatile 610The Versatile 610 four-wheel articulated drive is designed to enhance the profitability of large scale farming operations while upholding the Versatile cornerstones of reliability, durability, and ease of service and maintenance.in stocknew0.00 CADhttps://www.knmsales.com/versatile-610/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/versatile-4wd-610.1.jpgVersatile530Deltatrack 520DT 30 inch tracksThe Deltatrack 520 is one of Versatile legacy of production, an extensive articulated four-wheel-drive tractors. When the conception of a track unit began there was no doubt that a four-track system was the best solution for Versatile and our customers. In partnership with industry-leading suppliers, Versatile has developed a new class leader in the agricultural market.in stocknew0.00 CADhttps://www.knmsales.com/deltatrack-520dt/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/deltatrack_520.1.jpgVersatile531Deltatrack 570DT 30 inch tracksThe Deltatrack 570 is one of Versatile legacy of production, an extensive articulated four-wheel-drive tractors. When the conception of a track unit began there was no doubt that a four-track system was the best solution for Versatile and our customers. In partnership with industry-leading suppliers, Versatile has developed a new class leader in the agricultural market.in stocknew0.00 CADhttps://www.knmsales.com/deltatrack-570dt/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/deltatrack_570.1.jpgVersatile532Deltatrack 610DT 30 inch tracksThe Deltatrack 610 is one of Versatile legacy of production, an extensive articulated four-wheel-drive tractors. When the conception of a track unit began there was no doubt that a four-track system was the best solution for Versatile and our customers. In partnership with industry-leading suppliers, Versatile has developed a new class leader in the agricultural market.in stocknew0.00 CADhttps://www.knmsales.com/deltatrack-610dt/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/deltatrack_610.1.jpgVersatile533Deltatrack 610DT 36 inch tracksThe Deltatrack 610 is one of Versatile legacy of production, an extensive articulated four-wheel-drive tractors. When the conception of a track unit began there was no doubt that a four-track system was the best solution for Versatile and our customers. In partnership with industry-leading suppliers, Versatile has developed a new class leader in the agricultural market.in stocknew0.00 CADhttps://www.knmsales.com/deltatrack-610dt-36-inch-tracks/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/1_deltatrack_610.3.jpgVersatile534Deltatrack 570DT 36 inch tracksThe Deltatrack 570 is one of Versatile legacy of production, an extensive articulated four-wheel-drive tractors. When the conception of a track unit began there was no doubt that a four-track system was the best solution for Versatile and our customers. In partnership with industry-leading suppliers, Versatile has developed a new class leader in the agricultural market.in stocknew0.00 CADhttps://www.knmsales.com/deltatrack-570dt-36-inch-tracks/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/deltatrack_570.2.jpgVersatile535Deltatrack DT520 36 inch tracksThe Deltatrack 570 is one of Versatile legacy of production, an extensive articulated four-wheel-drive tractors. When the conception of a track unit began there was no doubt that a four-track system was the best solution for Versatile and our customers. In partnership with industry-leading suppliers, Versatile has developed a new class leader in the agricultural marketin stocknew0.00 CADhttps://www.knmsales.com/deltatrack-520dt-36-inch-tracks/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/versatile-dt520-t4f.2.jpgVersatile549Salford 4131The I-4131 combines two rows of concave disc blades split by two rows of coulters on the same frame to make for more aggressive tillage than wave coulters alone. This unit is equipped with Cat 4 articulating hitch, a hydraulic telescope with cushion, complete weight kit, hydraulic 3 bar 1/2 coil tines and manual single roller. Operating depth range 0 - 5. HP required between 350 and 410.in stocknew0.00 CADhttps://www.knmsales.com/salford-4131/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/summer.0.jpgSalford560Versatile NEMESIS 175This new tractor from Versatile has been designed and developed with a special focus on superior value, performance, and operator experience. The Nemesis is powered by an industry-leading Cummins Stage V compliant B6.7 (Stage V) engine and powershift transmission supplied by ZF. The three horsepower ratings available are 175 hp, 195 hp, and 210 hp.in stocknew0.00 CADhttps://www.knmsales.com/versatile-nemesis/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/versatile-nemesis-175.1.jpgVersatile600Vermeer TM1410 Trailed MowerWith a cutting width of 20.8 ft (6.3 m), the 10-series trailed mowers are ideal for operators who want to cut more hay in less time and want convenient features that take the stress out of operating, transporting and maintaining a large trailed mower. Features like the Q3® Cutter Bar, 2-point Quick Hitch hook up, a nitrogen charged accumulator suspension system, and the patented Quick-Clip® Blade Retention System that reduces the process of blade replacement to mere seconds. Big time productivity, big time convenience and a narrow 9-ft transport width. Plus, a 3-year cutter bar warranty on parts and labor.in stocknew0.00 CADhttps://www.knmsales.com/vermeer-tm1410-trailed-mower/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/vermeer-tm1410-trailed-mower.1.jpgVermeer620McCormick X6.470McCormick X6.470, 540/65R28 tires front, 650/65R38 tires rear, front fenders, 3 rear spool valves, power shuttle, 58+18 transmission 0% financing available for up to 60 monthsin stocknew0.00 CADhttps://www.knmsales.com/mccormick-x6.470/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/mccormick-x6.470.1.jpgMcCormick763Farm King Y1020 Rotary CutterFarm King Y1020 Semi-Mount twin spindle rotary cutter with slip clutch protection. Tractor requirements min 50HP.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-y1020-rotary-cutter/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-y1020-rotary-cutter_fall.1.jpgFarm King737Vermeer 605 XL baler± 16500 bales. Working conditionin stockused20700.00 CADhttps://www.knmsales.com/vermeer-605-xl-baler/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/605-xl-baler_summer.1.jpgVermeer625HLA BG6000 Bale Grapplethis unit has an Alo-Q-tach frame with hose kit and can Open up to 84. This Grapple can carry square bales 4-6 ft long or round bales 5-6ft diameter and has a capacity of 2000lbsin stocknew0.00 CADhttps://www.knmsales.com/hla-bg6000-bale-grapple/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/hla-bg6000-bale-grapple.1.jpgHLA627MK Martin MKGL778 Grader Levelerthis unit has a 72 working width, 3/8 x 2 reversible skid shoes, mouldboard thickness 1/4, cutting edge 1 adjustment, and has a weight of 630 lbsin stocknew0.00 CADhttps://www.knmsales.com/mk-martin-mkgl778-grader-leveler/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/mk-martin-mkgl678-grader-leveler.1.jpgMK Martin628MK Martin MKGL678 Grader Levelerthis unit has a 72 working width, 3/8 x 2 reversible skid shoes, mouldboard thickness 1/4, cutting edge 1 adjustment, and has a weight of 630 lbsin stocknew0.00 CADhttps://www.knmsales.com/mk-martin-mkgl678-grader-leveler/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/1_mk-martin-mkgl678-grader-leveler.1.jpgMK Martin629WIFO bale unrollerWIFO heavy duty 3 pt hitch bale unrollerin stocknew0.00 CADhttps://www.knmsales.com/mk-martin-bale-unroller/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/2_mk-martin-mkgl678-grader-leveler.1.jpgWIFO631Farm King 4572 rotary tillerThis unit has a Tillage width of 69, and come with a 3-point hitch Category I for tractors. requires 30 - 45HP. Colour Charcoalin stocknew0.00 CADhttps://www.knmsales.com/farm-king-4572-rotary-tiller/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-4572-rotary-tiller.1.jpgFarm King633Farm King 245 rotary tillerThis unit has a Tillage width of 45, and come with a 3-point hitch Category I for tractors. requires 14 - 22HP. Colour Charcoalin stocknew0.00 CADhttps://www.knmsales.com/farm-king-245-rotary-tiller/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-245-rotary-tiller.1.jpgFarm King634Kioti SM2410 mid-mount mowerThis Kioti mid-mount mower Fits Kioti compact tractor units CS2210, CS2410 and CS2510.in stocknew0.00 CADhttps://www.knmsales.com/kioti-sm2410-midmount-mower/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kioti-sm2410-mid-mount-mower.1.jpgKioti636Farm King 555 heavy-duty finishing mowerthis heavy-duty finishing mower has a cutting width of 60, and a cutting height of 1-1/2 to 5-1/2. Tractor requirements 15-55 hp. Weight 627lb.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-555-heavy-duty-finishing-mower/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-555-heavy-duty-finishing-mower.1.jpgFarm King637Farm King 530 finishing mowerThis homeowners series finishing mower has a cutting width of 60, and a cutting height of 1-1/2 to 5-1/2. Tractor requirements 12-25hp. Weight 442lb.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-530-finishing-mower/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-530-finishing-mower.1.jpgFarm KingĀ 638Farm King 755 heavy-duty finishing mowerThis heavy-duty finishing mower has a cutting width of 84, and a cutting height of 1-1/2 to 5-1/2, tractor requirements 25-55hp, weight 780lbin stocknew0.00 CADhttps://www.knmsales.com/farm-king-755-heavy-duty-finishing-mower/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-755-heavy-duty-finishing-mower.1.jpgFarm King640Farm King RT10 tedderThis tedder has a working width of 10', a transport width of 8'2, and a working speed of 9mph. Unit weight is 490 lbin stocknew0.00 CADhttps://www.knmsales.com/farm-king-rt10-tedder/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/6_summer.1.jpgFarm King641Farm King RT19 tedderThis tedder has a working width of 19', a transport width of 10'5, and a working speed of 9mph. Unit weight is 1,400 lbin stocknew0.00 CADhttps://www.knmsales.com/farm-king-rt19-tedder/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-rt19-tedder.1.jpgFarm King642Anderson IFX 720 bale wrapperThis 2021 Anderson IFX 720 bale wrapper Farm King Combo can wrap Round bale 6 ft by 5 ft. This unit comes with remote control for starting, steering and stopping, and has a large fuel tank.in stocknew0.00 CADhttps://www.knmsales.com/2021-anderson-ifx-720-bale-wrapper/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/2021-anderson-ifx-720-bale-wrapper_summer.2.jpgAnderson6432021 Anderson Hybrid X bale wrapperThis unit Can do round bales 6 ft by 5 ft or square bales up to 6 ft by 3 ft, it has 4 stretchers, and autopilot.in stocknew0.00 CADhttps://www.knmsales.com/2021-anderson-hybrid-x-bale-wrapper/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/2021-anderson-hybrid-x-bale-wrapper.1.jpgAnderson644Anderson RB580 individual bale wrapperThis unit has a manual wrapping process via the hydraulic controls of the tractor, mechanical plastic cutting and can handle bales up to 6 ft by 5 ft.in stocknew0.00 CADhttps://www.knmsales.com/2021-anderson-rb580-individual-bale-wrapper/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/anderson-rb580_summer.1.jpgAnderson646Farm King Y482 portable grain cleaner8 x 11' loading auger, electric engine not included. this unit is a 2 Stage cleaner with an engine drive system, intake auger, it also comes with a cone screen and drum screen.in stocknew0.00 CADhttps://www.knmsales.com/2020-farm-king-482-portable-grain-cleaner/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-y482-portable-grain-cleaner_summer.1.jpgFarm King649Vermeer MC2800 Mower Conditionerthis unit has side pull, 6 discs, rubber roller conditioner, 540 PTO, cutting width of 9.1ft, minimum cutting height 1 inch, maximum cutting height 8 inches, minimum of 65 HP required. Hydraulic flow rate required 6 GPM.in stocknew0.00 CADhttps://www.knmsales.com/vermeer-mc2800-mower-conditioner/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/vermeer-mc2800_summer.01.jpgVermeer65224' Farm King TedderThis unit has a working width of 24 ft and has a working speed of 9 mph.in stocknew0.00 CADhttps://www.knmsales.com/24-farm-king-tedder/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/24-farm-king-tedder.1.jpgFarm King656Vermeer Rake VR1224This unit Requires 30hp with Hydraulic type one double-acting and requires 5 GPM flow. It has a Maximum raking speed of 14 mph, minimum raking width of 19.9 ft /maximum raking width of 24.4 ft, minimum windrow width of 21 inches /maximum windrow width of 98 inchesin stocknew0.00 CADhttps://www.knmsales.com/vermeer-rake-vr1224/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/vr1224.summer.1.jpgVermeer659New Vermeer 605NLike all Vermeer products, the 605N Vermeer baler is built to last Baler diameter is 72 inches, baler width is 61. this unit requires 80 HP, recommended 100 HPin stocknew0.00 CADhttps://www.knmsales.com/vermeer-605n-baler/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/vermeer-605n-true_spring.01.jpgVermeer666Versatile 275This Tractor has a deluxe cab with leather seating, its front tires are 600/65R28, and rear tires are 710/70R38 Trelleborg, This unit comes with ISOBUS completion package, autosteer ready, radio, LED lights, suspended front axle with difflock, HD drawbar, high flow hydraulics, variable pitch reversing fan, front weight package, and front fenders and rear fender extensions.in stocknew0.00 CADhttps://www.knmsales.com/versatile-275/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/versatile-275_summer.1.jpgVersatile6752021 Segue 7TThis unit has a hydraulic extender, dogleg, extra side display and 1000 RPM CV PTOin stocknew0.00 CADhttps://www.knmsales.com/2021-segue-7t/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/2021-segue-7t.1.jpgSupreme676Supreme 700T1-3/8 21 spline CV PTO, 8' conveyor, right-hand dogleg, hydraulic extender, extra side display, 10 rubber extension.in stocknew0.00 CADhttps://www.knmsales.com/products/supreme-700t/498/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/1_supreme-700t.1.jpgSupreme679Vermeer R2300 RakeMinimum raking width 18ft, maximum raking width 23 ft, minimum windrow width 36 inches, maximum windrow width 72 inches. Tractor requirements 35 HP and 8 GPM hydraulic flow rate.in stocknew0.00 CADhttps://www.knmsales.com/vermeer-r2300-rake/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/vermeer-r2300_summer.1.jpgVermeer688Anderson IFX720 bale wrapper Farm King ComboRound bale 6 ft by 5 ft, remote control for starting, steering and stopping, large fuel tank.in stocknew0.00 CADhttps://www.knmsales.com/anderson-ifx720-bale-wrapper-farm-king-combo/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/anderson-ifx720-bale-wrapper-farm-king-combo.1.jpgAnderson696New 2017 McCormick X4.70110 HP tractor 3.6L Deutz engine, mechanical reverse, 3 pt hitch, 540/1000 PTO, 340/85R24 tires on the front, rear tires 420/85R34.in stocknew0.00 CADhttps://www.knmsales.com/new-2017-mccormick-x4.70/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/new-2017-mccormick-x4.70.1.jpgMcCormick697Versatile Fury HS.300this unity is 30 ft wide with 24 notched blades on the front and rear and comes with a steel basket.in stocknew0.00 CADhttps://www.knmsales.com/versatile-fury-hs.300/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/3_summer.1.jpgVersatile700Versatile Fury HS.350This unit has a working width of 35 ft with 24 notched blades front and rear and comes with steel basket rollerin stocknew0.00 CADhttps://www.knmsales.com/versatile-fury-hs.350/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/versatile-fury-hs.350.1.jpgVersatile706Vermeer TD190 tedderTedding width of 19.5 ft unit has 4 baskets with 6 tines per arm, its PTO HP requirement are 25, and has 1 single-acting hydraulic, PTO drive 540 rpmin stocknew0.00 CADhttps://www.knmsales.com/vermeer-td190-tedder/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/td190_summer.1.jpgVermeer707Vermeer TD100 TedderTedding width of 10.6ft, Uit has 2 baskets and has 6 tines per basket its PTO HP requirements are 15 hp, 540 rpm, and a maximum operating speed 9mphin stocknew0.00 CADhttps://www.knmsales.com/vermeer-td100-tedder/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/td100_summer.1.jpgVermeer708Versatile 210 NemesisThis Unit Features a Cummins 6.7L diesel, 210 rated HP, 98 transaxle, 40km, 710/70R8 rear, 600/65R28 front, leather seating, high flow hydraulics, ISOBUS completion package, HD drawbar, LED cab lights, LED vehicle lights, autosteer ready, radio, front fenders, rear weights, auto temperature system.in stocknew0.00 CADhttps://www.knmsales.com/versatile-210-nemesis/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/versatile-210-nemesis.1.jpgVersatile715Vermeer rake R2800Its raking width is between 19 ft and 28 ft and windrow width is between 30 inches and 84 inches. Units minimum HP requirements is 70 and has 2 double-acting hydraulics with a flow rate of min 8 gal/minin stocknew0.00 CADhttps://www.knmsales.com/vermeer-rake-r2800/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/vermeer-rake-r2800.1.jpgVermeer727Kioti CS2520 with loaderKioti tractors are Perfect for your acreage, Now with 0% financing available for 84 months.in stocknew0.00 CADhttps://www.knmsales.com/kioti-cs2520-with-loader/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kioti-cs2520-with-loader.1.jpgKioti728Kioti DK4710SE HSTLooking for a durable compact tractor? Look no further than a Kioti DK4710SE HST With the power (44.9hp), performance and comfort you need. Now with 0% financing available for 72 months!in stocknew0.00 CADhttps://www.knmsales.com/kioti-dk4710se-hst/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kioti-dk4710se-hst.1.jpgKioti730Kioti CK2610 With Loader/BucketKioti tractors are Perfect for your acreage, Now with 0% financing available for 84 months.in stocknew0.00 CADhttps://www.knmsales.com/kioti-ck2610-with-loader-bucket/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kioti-ck2610-with-loader-bucket.1.jpgKioti731Farm King RSB9 sickle bar mowerThis Farm King RSB9 sickle bar mower has a working width of 9' and a working speed of 9mph This sickle bar mower comes has a 3 pt hitch cat I / II and hydraulic lift, its HP requirements are 40hp and this unit has a weight of 711 lbin stocknew0.00 CADhttps://www.knmsales.com/farm-king-rsb9-sickle-bar-mower/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-rsb9_summer.1.jpgFarm King733Farm King Y180 roller millThis Farm King Y180 roller mill has a Roll diameter of 10 with 8 (6 corn) grooves per inch it has a capacity of 200-300 bu/hr this unit requires 40-60 PTO HP and it also comes with a magnet. Comes with transportin stocknew0.00 CADhttps://www.knmsales.com/farm-king-y180-roller-mill/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-y180-roller-mill_winter.1.jpgFarm King734Farm King RE12 RakeThis unit has 12 wheels, a working width of 24' 3, 4 tires, 60 rake wheels, and requires 40HP.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-re12-rake/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-re12-rake.1.jpgFarm King735Farm King RE14 rakeThis Rake has 14 wheels, a working width of 27' 2, 6 tires, 60 wide rake wheels, and requires 40HP.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-re14-rake/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-re14-rake.1.jpgFarm King736Farm King RR7700 double rotary rakeThis double rotary rake has a Working width of 23 to 26 ft, units require 70-80 hp, it Weighs 3, 951lb and had a Transport width of 8.2 ftin stocknew0.00 CADhttps://www.knmsales.com/farm-king-rr7700-double-rotary-rake/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-rr7700-double-rotary-rake.1.jpgFarm King784Farm King MDN7 disc mowerThis Unit has 7 discs, 14 blades, a working width of 9'4, PTO 540 RPM, tractor requirement of 55HP.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-mdn7-disc-mower/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-mdn7-disc-mower_summer.1.jpgFarm King785Kioti CK4010SE HSTJust arrived! 40 HP, loader, bucket, block heater, 0% financing availablein stocknew0.00 CADhttps://www.knmsales.com/kioti-ck4010se-hst/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kioti-ck4010se-hst_summer.0.jpgKioti786New Trimble GPS systemThis includes the GFX-350 display kit and the NAV-500 antennain stocknew0.00 CADhttps://www.knmsales.com/new-trimble-gps-system/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/new-trimble-gps-system.1.jpgTrimble790McCormick X7.660 standard151 HP, loader, grapple, mechanical cab suspension, 3 rear spool valves, 540 / 1000 RPM PTO. 0% financing available for 60 monthsin stocknew0.00 CADhttps://www.knmsales.com/mccormick-x7.660-standard/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/mccormick-x7.660-standard_summer.1.jpgMcCormick792Versatile DT520 DeltaTrackThis Unit Features a Deluxe cab with leather seating, ISOBUS completion kit, radio, LED lights Cab and chassis, PTO, front and rear differential lock, autosteer ready, high flow hydraulics, and variable pitch reversible fan.in stocknew0.00 CADhttps://www.knmsales.com/versatile-dt520-deltatrack/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/versatile-dt520-delta-trak_summer.1.jpgVersatile794Vermeer BPX9010 2022 modelmore coming in soon! This Bale Processor is an all-around processor ready to perform a variety of applications that will Distribute a consistent, uniform windrow of crop along the bunk line or out in the pasture. Or spread bedding with consistency and accuracy at ranges up to 50 ft (15.2 m).in stocknew0.00 CADhttps://www.knmsales.com/vermeer-bpx9010-2022-model/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/vermeer-bpx9010-2022-model_summer.1.jpgVermeer797Farm King rotary cutter Y528This Farm King rotary cutter has a 3 pt hitch, tailwheel, and slip clutch protectionin stocknew0.00 CADhttps://www.knmsales.com/farm-king-rotary-cutter-y528/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-rotary-cutter-y528_summer.1.jpgFarm King801John Deere 650 discThis unit is 30 feet wide with inch spacing, 21inch - 22inch smooth bladesin stockused33500.00 CADhttps://www.knmsales.com/john-deere-650-disc/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/john-deere-650-disc_summer.1.jpgJohn Deere804Farm King Y628SO rotary cutterThis rotary cutter has a cutting width of 72 inches and has a changeable cutting height between 2 - 12 inches, minimum HP requirement of 30 HP, PTO slip clutch protected.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-y628so-rotary-cutter/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-y628so-rotary-cutter_fall.1.jpgFarm King805Farm King Y728S rotary cutterThis rotary cutter has a cutting width of 84inches with a changeable cutting height between 2 - 12 inches, this unit has a minimum HP requirement of 30 HP, PTO slip clutch protected.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-y728s-rotary-cutter/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-y728s-rotary-cutter_fall.1.jpgFarm King807Versatile FURY R.350This tillage tool implement can handle rejuvenating pasture and hayland and can manage larger field obstacles such as rocks larger than 6, this unit can run in a mix of cereals, oilseeds and some corn for a slight increase in productivity in acres per hour, this machine might be your machine.in stocknew0.00 CADhttps://www.knmsales.com/versatile-fury-r.350/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/versatile-fury-r.350_fall.1.jpgVersatile808Kuhn VB 3190 balerthis baler has 14 knives Opticut, 4 x 6 silage baler with ROTO-CUT system, 500/45x22.5, endless belts, netwrapin stocknew0.00 CADhttps://www.knmsales.com/kuhn-vb-3190-baler/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kuhn-vb-3190-baler_fall.1.jpgKuhn809Farm King Y628SC rotary cuterThis rotary cutter has a 72inch cutting width and a cutting height of between 2inch - 12inch, a minimum HP requirement of 30HP, PTO slip clutch protected.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-y628sc-rotary-cuter/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-y628sc-rotary-cuter_fall.1.jpgFarm King810Farm King Y728SC rotary cutter84 cutting width, cutting height 2 to 12, Minimum HP requirement 30HP, PTO slip clutch protected.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-y728sc-rotary-cutter/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-y728sc-rotary-cutter_fall.1.jpgFarm King811Farm King Y528SO rotary cutterThis rotary cutter has a cutting width of 60inches and a cutting height of between 2inches to 12inches with a minimum HP requirement of 30HP, PTO slip clutch protected.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-y528so-rotary-cutter/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-y528so-rotary-cutter_fall.1.jpgFarm King812Farm King YGS60C grading scraperThis grading scraper has a working width of 60inches with 4 shanks and a tractor HP requirement of between 20 to 55 HPin stocknew0.00 CADhttps://www.knmsales.com/farm-king-ygs60c-grading-scraper/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-ygs60c-grading-scraper_fall.1.jpgFarm King813Farm King Y1531-6 flex wing rotary cutterThis flex-wing rotary cutter has a working width of 186 inches and a cutting height of between 2inches to 15inches, tractor requirement of 65 HP.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-y1531-6-flex-wing-rotary-cutter/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-y1531-6-flex-wing-rotary-cutter_fall.1.jpgFarm King814Farm King Y1030 flex-wing rotary cutterThis flex-wing rotary cutter has a working width of 10.5 feet and a cutting height of between 2inches to 15inches, tractor requirement of 65 HP,in stocknew0.00 CADhttps://www.knmsales.com/farm-king-y1030-flex-wing-rotary-cutter/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-y1030-flex-wing-rotary-cutter_fall.1.jpgFarm King822Trioliet Solomix 2 1600LHeavy-duty PTO, Chain extension, electric speed regulator for cross conveyor chain to both directions, top knife set, magnet on the back of the auger wing, electric operation, LED lights, CC 300 App with external WIFI-unit, scale, reduction gearbox, rubber hay ring. Call today for pricing!in stocknew0.00 CADhttps://www.knmsales.com/trioliet-solomix-2-1600l/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/trioliet-solomix-2-1600l_winter.1.jpgTrioliet823McCormick X7.650This Tractor has mechanical cab suspension, loader, grapple, 4 hydraulic outlets. Low rate financing available!in stocknew0.00 CADhttps://www.knmsales.com/mccormick-x7.650/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/mccormick-x7.650_winter.1.jpgMcCormick824Elmer's RavageThe Elmers Ravage Bale Processor is designed to maximize your processing time with the ability to hold up to 3 square or 2 round bales including a variety of bale types. Live floor for full control, great visibility, adjustable upper beater bar, directional chute to spread or bunk, spring-loaded bale discharge door. Spreads up to 50 ft. Can handle round and square bales, minimum 125 HP, maximum 175 HP. Call Today for pricing!in stocknew0.00 CADhttps://www.knmsales.com/products/elmers-ravage/632/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/elmers-ravage_winter.1.jpgElmer's8251996 Spay-Air 7800 3pt hitch SprayerThis Sprayer has a 90' boom and comes with a 170-gallon tank in the back and a 250-gallon tank on the front.in stockused8500.00 CADhttps://www.knmsales.com/1996-spay-air-7800-3pt-hitch-sprayer/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/1996-spay-air-7800-3pt-hitch-sprayer_winter.1.jpg1996 Spay-Air8272007 Case IH STX430HDThis 2007 Case IH only has 7500 hrs on it and comes with 5 remotes, Powershift, JD GPS and New 710 Goodyear tires with fluid in the inside tires Consignment unit!in stockused140000.00 CADhttps://www.knmsales.com/2007-case-ih-stx430hd/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/2007-case-ih-stx430hd_summer.01.jpgCase829Home-built side dump wagonThis home-built side dump wagon can haul 2 round bales, firewood or sawlogs. It is 10ft long and has a hydraulic dump.in stockused6500.00 CADhttps://www.knmsales.com/home-built-side-dump-wagon/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/home-built-side-dump-wagon_winter.1.jpgHome-built830Kuhn Haybob 300This Haybob 300 is a center delivery tedder/rake combination with a working width of 9.8 feetin stocknew0.00 CADhttps://www.knmsales.com/kuhn-haybob-300/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kuhn-haybob-300_winter.1.jpgKuhn831Kioti NS4710 with loaderThe Kioti NS4710 has a manual transmission, a second remote valve, block heater and comes with a loader/bucket and bolt-on cutting edge.in stocknew0.00 CADhttps://www.knmsales.com/kioti-ns4710-with-loader/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kioti-ns4710-with-loader_winter.1.jpgKioti832Shop built 18-foot land rollerShop built 18-foot land roller with transportin stockused22000.00 CADhttps://www.knmsales.com/shop-built-18-foot-land-roller/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/shop-built-18-foot-land-roller_winter.1.jpgShop built834Kuhn GF 7802 THA pull-type rotary tedderWorking width 25'7, overall width in operating position 29', 6 rotors, PTO speed 540 RPM, and 7 tines per rotor Minimum PTO power requirements 35 HPin stocknew0.00 CADhttps://www.knmsales.com/kuhn-gf-7802-tha-pull-type-rotary-tedder/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kuhn-gf-7802-tha-pull-type-rotary-tedder_summer.01.jpgKuhn8382002 Premier 2940 SwatherThis Swather comes with a 1992 30 ft wide 960 MacDon header. it has 4000 hrs and a 3.9 Cummins engine.in stockused25000.00 CADhttps://www.knmsales.com/2002-premier-2940-swather/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/2002-premier-2940-swather_winter.1.jpgMacDon Premier839Kuhn GF 10812T GyroTedderThis GyroTedder comes with a headland lift control system and has a Working width of 35 foot 4 inches, it has 10 rotors and 6 tines per rotor, this unit has a min PTO HP of 55in stocknew0.00 CADhttps://www.knmsales.com/kuhn-gf-10812t-gyrotedder/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kuhn-gf-10812t-gyrotedder_winter.1.jpgKuhn844Farm King Y180C roller millThis Roller Mill Features transport tires, magnet, stand, hydraulic unloading auger and chrome rollers.in stocknew0.00 CADhttps://www.knmsales.com/farm-king-y180c-roller-mill/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-y180c-roller-mill_winter.jpgFarm King846Farm King Y180 Roller MillThis roller mill comes with transport tires, magnet, stand and hydraulic unloading augerin stocknew0.00 CADhttps://www.knmsales.com/products/farm-king-y180-roller-mill/652/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/farm-king-y180-roller-mill.1_winter.11.jpgFarm King849Segue 4SThis Feed Wagon Features a 540 CV PTO, 44 folding conveyor, drop chute with magnet, extra side display and 10 rubber extension.in stocknew0.00 CADhttps://www.knmsales.com/products/segue-4s/655/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/segue-4s_winter.12.jpgSupreme850Elmers 70ft Super 7 HarrowThis Harrow is 70ft with 7x7 bar harrow sections, 14 spacing, and a total of 294 tines.in stocknew0.00 CADhttps://www.knmsales.com/elmers-70ft-super-7-harrow/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/elmers-super-7_winter.111.jpgElmers853Kuhn GA4230T single Rotary RakeThis unit has a working width, including windrow of 13'10, a clean swept width of 9'2, and a windrow width of 4'3 It has a PTO speed of 540 RPM, with a minimum PTO power requirement 30 HP.in stocknew0.00 CADhttps://www.knmsales.com/kuhn-ga4230t-single-rotary-rake/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kuhn-ga-4230-t-single-rotor-rotary-rake_summer.01.jpgKuhn863Case 1070This Case Tractor Has 9400 hours and comes with 2 remotes. The inside of the cab is redone and is all in working condition. There is also an older loader that can go with this Tractor if wanted!in stockused15000.00 CADhttps://www.knmsales.com/case-1070/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/case-1070_winter.2.jpgCase8752000 Morris Maxim II 7180 VRT30ft seeder, double shoot Air drillin stockused26500.00 CADhttps://www.knmsales.com/2000-morris-maxim-ii-7180-vrt/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/2000-morris-maxim-ii-7180-vrt_summer.2.jpgMorris877Salford 5200 ENFORCERThis unit was a demo unit and works grate. If you want your field worked, this is the unit.in stockused0.00 CADhttps://www.knmsales.com/salford-5216-enforcer/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/salford-5216-enforcer-demo_summer.2.jpgSalford8782013 RiteWay JH8168 HarrowThis harrow is 68' Wide with tine lengths between 22 and 24. This Unit is ready to go.in stockused39500.00 CADhttps://www.knmsales.com/2013-riteway-jh8168-harrow/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/2013-riteway-jh8168-harrow_summer.01.jpgRite Way880Kuhn GF 5202 THA TedderThis unit has a working width of 17'1 and an overall width in operating position of 19'8, 4 rotors, PTO speed 540 RPM, drawbar hitch, min PTO power 20 HPin stocknew0.00 CADhttps://www.knmsales.com/kuhn-gf-5202-tha-tedder/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kuhn-gf-5202-tha-tedder_summer.01.jpgKuhn881Kuhn GA7932 Twin-rotorTrailed side-delivery rotary rake with a Working width including windrow 1 swath 13'3 - 24'5, 2 swaths 25'1, clean swept width 9'6 - 18'5, windrow width 3'11 - 5'11, single or double windrow, 2 rotors, 3-D terrain following, PTO speed 540 RPM, minimum PTO requirement 55 HP.in stocknew0.00 CADhttps://www.knmsales.com/kuhn-ga7932-twin-rotor/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kuhn-ga7932-twin-rotor_summer.01.jpgKuhn882Kubota TE4052T TedderThis Tedder has a working width of 17'1 with 4 rotors and a minimum PTO power requirement of 20 HP. The units PTO speed is 540 RPM.in stockused9300.00 CADhttps://www.knmsales.com/kubota-te4052t-tedder/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kubota-te4052t-tedder_summer.01.jpgKubota883Home build 2 way bladeThis Home build 2 way blade is 78 Inch wide with a skid steer mount.in stockused2600.00 CADhttps://www.knmsales.com/home-build-2-way-blade/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/home-build-2-way-blade_summer.01.jpgHome build885Case IH DH362 Draper HeaderThis 2012 Case IH DH362 draper header is 36' wide and has been Hardly used. Canvas stored inside.in stockused19800.00 CADhttps://www.knmsales.com/case-ih-dh362-draper-header/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/case-ih-dh362-draper-header_summer.01.jpgCase IH8871996 Premier 2930This Swather has 2870 hours on it and comes with a 21 foot Mac Don 960 header and has triple deliveryin stockused25000.00 CADhttps://www.knmsales.com/1996-premier-2930/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/1996-premier-2930_summer.03.jpgPremier890New Kuhn SR 112 GII RakeThis Kuhn 12 wheel speed rake has high clearance design, 55 wheels, working width 18'9 - 23'4. windrow width 3' - 7'.in stocknew0.00 CADhttps://www.knmsales.com/new-kuhn-sr-112-gii-rake/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/new-kuhn-sr-112-gii.011.jpgKuhn892Kuhn Triple MowerYou Can Now Triple Your Efficiency by delivering a clean cut and a wide cutting width that is ideal for large-acreage producers. this unit features a total combined working width of up to 32.58 ft taking productivity to a whole new level.in stocknew0.00 CADhttps://www.knmsales.com/kuhn-triple-mower/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kuhn-triple-mower.01.jpgKuhn893Vermeer 504 Pro G3 BalerThe versatility of G3 Pro balers allows you to decide how to make hay! You can Bale it wet or dry and decide if you would like to Chop the hay with 8, 9, or all 17 knives or don't chop it at all the choice is yours. The 504 Pro G3 baler is how to win the day when making high-quality hay.in stocknew0.00 CADhttps://www.knmsales.com/vermeer-504-pro-g3-baler/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/vermeer-504-pro-g3-baler_summer.01.jpgVermeer895Heavy build 22ft DiskThis Heavy build Disc is 22ft wide with front notched blades (25), rear blades smooth (25)and 10 1/2 spacing. This unit has stone flex hangersand an HP requirement of 15 HP per foot. 22 ft disc. Front blades notched (25), rear blades smooth (25). Heavy build, has stone flex hangers.in stockused50000.00 CADhttps://www.knmsales.com/heavy-build-22ft-disk/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/heavy-build-22ft-disk_summer.01.jpgunknown896Sitrex QR12 rakeThis is a 12 Wheel rake with a working width of between 21'8 and 24'6 and a windrow width of between 3' and 6'7.in stockused8800.00 CADhttps://www.knmsales.com/sitrex-qr12-rake/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/sitrex-qr12-rake_summer.01.jpgSitrex898Flexicoil S80 diamond harrowThis Flexicoil S80 diamond harrow is 70 ft wide.in stockused6900.00 CADhttps://www.knmsales.com/flexicoil-s80-diamond-harrow/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/flexicoil-s80-diamond-harrow_summer.01.jpgFlexicoil8992009 Vermeer R2300 rakeThe rake is in overall good condition, a must-see!in stockused22500.00 CADhttps://www.knmsales.com/2009-vermeer-r2300-rake/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/2009-vermeer-r2300-rake_summer.01.jpgVermeer900Kuhn VB 560 Opticut Round BalerIndustry-leading density, Industry-leading productivity, outstanding performance in silage an dry crops, reliable and durable. This describes the Kuhn VB 560 baler. Makes up to a 5' x 6' bale.in stocknew0.00 CADhttps://www.knmsales.com/kuhn-vb-560-opticut-round-baler/?ref=r:Facebook;g:Shop;https://www.knmsales.com/uploads/products/kuhn-vb-560-opticut-round-baler_summer.01.jpgKuhn